2X2米1噸稱牛電子地磅,湖北2噸牲畜稱廠家,荊門3噸稱豬電子秤
DCS-HT-D ¥3800污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
東莞市尼嘉斯塑膠機械有限公司
怎樣選擇除濕干燥機?
不同的除濕干燥機設備使用范圍都是有限制的,每種物料可選擇的干燥可以都多種,但是Z適合的只有一種,若是選型不當,用戶不但要承擔不必要的一次性高昂采購成本外,還要在整個使用期內付出沉重的代價,諸如效率低、耗能高、運行成本高、產品質量差、甚至設備裝置根本不能正常運行等。以下是除濕干燥機選型的通用原則,理想的選型必須根據自己的條件來挑選Z適合自己的干燥設備。
PET/PETG /PLA/PMMA/PCCRYSTAL DRYING SYSTEM
PET/PETG/PLA/PMMA/PC
樹脂擠出成型結晶干燥系統
尼嘉斯的結晶及干燥系統設備以豐富的干燥技術、程序化的電腦控制技術以高性能的機械技術為基礎,高效地解決片材的擠出生產過程中所產生的片材脆化、含水分解、粘度降低、酸性劣化等品質問題。
The NIASI crystal&drying system equipment is built on experienced drying technology,programmed computer control and high performance of mechanical technology, which efficiently solves the problems e.g. sheet orpiece brittleness, resolve with water, reduce of viscosity and degradation of acid etc. during the plastic extrusion processing course.
尼嘉斯的結晶、干燥系統設備以人性化設計為基礎操作使用、保養快捷簡便確保擠出生產線連續穩定地提供干燥完成的樹脂原料。
The NIASI crystal&drying system equipment with humanized designed which can easy and efficient assure the supply of dried resin material incessantly and steadily.
尼嘉斯的樹脂結晶、干燥系統設備要求對溫度、風量、風壓、輸送時間等系統參數進行在線高精度控制、并使用系統內交互熱能充分利用、大幅度降低了能耗。系統過濾裝置可高效過濾原料中的粉塵,確保制品的品質穩定。
The NIASI crystal&drying system equipment requires for high precisely control of the air temperature, volume, pressure and feeding time etc.and fully use of the internal heat energy which can greatly reduce the consumption of energy power. Also the filter equipment could efficiently reduce the powder or duster in material this highly helps to keep the high quality of the products.
干燥能力參照表 Specifications for Drying Capacity
原料 | 干燥 溫度 | 干燥 時間 | 比熱 | 原料 比重 | 除濕 前含 水率 | 除濕 后含 水率 | 干燥能力 | ||||||||||||||
ND-30 | 50 | 80 | 120 | 150 | 200 | 300 | 400 | 500 | 700 | 1000 | 1500 | 2000 | 3000 | 4000 | |||||||
ABS | 80 | 2-3 | 0.34 | 0.6 | 0.3 | 0.02 | 11 | 18 | 27 | 35 | 71 | 200 | 180 | 210 | 285 | 355 | 425 | 710 | 1065 | 1500 | 1600 |
CA | 75 | 2-3 | 0.5 | 0.5 | 1 | 0.02 | 9 | 15 | 22 | 30 | 60 | 105 | 150 | 180 | 235 | 295 | 355 | 590 | 885 | 1200 | 1330 |
CAB | 75 | 2-3 | 0.5 | 0.5 | 0.8 | 0.02 | 9 | 15 | 22 | 30 | 60 | 90 | 150 | 180 | 235 | 295 | 355 | 590 | 885 | 1200 | 1330 |
CP | 75 | 2-3 | 0.6 | 0.6 | 1 | 0.02 | 11 | 18 | 27 | 35 | 71 | 90 | 180 | 210 | 235 | 355 | 425 | 710 | 1060 | 1500 | 1600 |
LCP | 150 | 4 | 0.6 | 0.6 | 0.04 | 0.02 | 8 | 13 | 20 | 27 | 55 | 106 | 135 | 160 | 210 | 265 | 320 | 530 | 800 | 1150 | 1200 |
POM | 100 | 2 | 0.35 | 0.6 | 0.2 | 0.02 | 16 | 27 | 40 | 53 | 105 | 80 | 265 | 320 | 425 | 530 | 640 | 1060 | 1600 | 1800 | 2400 |
IONOMER | 90 | 3-4 | 0.55 | 0.5 | 0.1 | 0.04 | 7 | 11 | 17 | 22 | 44 | 160 | 111 | 133 | 177 | 220 | 265 | 442 | 663 | 750 | 1000 |
PA6/6.6/6.10 | 75 | 4-6 | 0.4 | 0.65 | 1 | 0.05 | 6 | 10 | 14 | 19 | 38 | 66 | 96 | 115 | 153 | 192 | 230 | 383 | 575 | 960 | 1040 |
PA11 | 75 | 4-5 | 0.58 | 0.65 | 1 | 0.05 | 7 | 12 | 17 | 23 | 46 | 58 | 115 | 138 | 184 | 230 | 275 | 460 | 690 | 780 | 1150 |
PA12 | 75 | 4-5 | 0.28 | 0.65 | 1 | 0.05 | 7 | 12 | 17 | 23 | 46 | 69 | 115 | 138 | 184 | 230 | 275 | 460 | 690 | 780 | 1150 |
PC | 120 | 2-3 | 0.28 | 0.7 | 0.3 | 0.01 | 13 | 21 | 31 | 41 | 83 | 69 | 206 | 250 | 330 | 413 | 495 | 826 | 1238 | 1400 | 1860 |
PU | 90 | 2-3 | 0.45 | 0.65 | 0.3 | 0.02 | 11 | 19 | 29 | 38 | 77 | 124 | 190 | 230 | 307 | 383 | 460 | 767 | 1150 | 1530 | 2080 |
PBT | 130 | 3-4 | 0.3-0.5 | 0.7 | 0.2 | 0.02 | 9 | 15 | 23 | 31 | 62 | 115 | 155 | 186 | 248 | 310 | 372 | 620 | 930 | 1100 | 1600 |
PE | 90 | 1 | 0.55 | 0.6 | 0.01 | <0.01 | 32 | 53 | 80 | 106 | 212 | 93 | 531 | 637 | 850 | 1065 | 1275 | 2125 | 3185 | 3600 | 4800 |
PEI | 150 | 3-4 | 0.6 | 0.6 | 0.25 | 0.02 | 8 | 13 | 20 | 27 | 53 | 318 | 133 | 160 | 212 | 265 | 320 | 530 | 800 | 1030 | 1370 |
PET | 160 | 4-6 | 0.3-0.5 | 0.85 | 0.2 | 0.05 | 8 | 13 | 19 | 25 | 50 | 80 | 125 | 150 | 200 | 250 | 300 | 500 | 750 | 1150 | 1360 |
PETG | 70 | 3-4 | 0.6 | 0.6 | 0.5 | 0.02 | 8 | 13 | 20 | 27 | 53 | 75 | 133 | 160 | 212 | 265 | 320 | 530 | 800 | 1030 | 1370 |
PEN | 170 | 5 | 0.85 | 0.85 | 0.1 | 0.05 | 9 | 15 | 23 | 30 | 60 | 90 | 150 | 180 | 240 | 300 | 360 | 600 | 900 | 1150 | 1360 |
PES | 150 | 4 | 0.7 | 0.7 | 0.8 | 0.02 | 9 | 15 | 23 | 30 | 60 | 90 | 150 | 180 | 240 | 630 | 360 | 600 | 900 | 1050 | 1400 |
PMMA | 80 | 3 | 0.65 | 0.65 | 0.5 | 0.02 | 11 | 19 | 29 | 38 | 77 | 115 | 190 | 230 | 310 | 385 | 460 | 765 | 1150 | 1530 | 1730 |
PPO | 110 | 1-2 | 0.4 | 0.5 | 0.1 | 0.04 | 13 | 22 | 33 | 44 | 88 | 133 | 220 | 265 | 355 | 440 | 530 | 885 | 1330 | 1730 | 2660 |
PPS | 150 | 3-4 | 0.6 | 0.6 | 0.1 | 0.02 | 8 | 13 | 20 | 27 | 53 | 80 | 133 | 160 | 212 | 265 | 320 | 530 | 800 | 1030 | 1370 |
PU | 120 | 2 | 0.27 | 0.6 | 0.4 | 0.02 | 16 | 27 | 40 | 53 | 105 | 160 | 265 | 320 | 425 | 530 | 640 | 1060 | 1600 | 1800 | 2400 |
PP | 90 | 1 | 0.46 | 0.5 | 0.1 | 0.02 | 26 | 44 | 66 | 88 | 180 | 265 | 442 | 530 | 710 | 885 | 1060 | 1770 | 2655 | 3500 | 4000 |
GP(GP) | 80 | 1 | 0.28 | 0.5 | 0.1 | 0.02 | 26 | 44 | 66 | 88 | 180 | 265 | 442 | 531 | 708 | 885 | 1062 | 1770 | 2655 | 3500 | 4000 |
PSU | 120 | 3-4 | 0.31 | 0.65 | 0.3 | 0.02 | 8 | 14 | 22 | 29 | 60 | 85 | 145 | 173 | 230 | 290 | 345 | 575 | 865 | 1300 | 1485 |
PVC | 70 | 1-2 | 0.2 | 0.5 | 0.1 | 0.02 | 13 | 22 | 33 | 44 | 90 | 135 | 220 | 265 | 355 | 442 | 530 | 885 | 1330 | 1730 | 2660 |
PAN(AS) | 80 | 14-2 | 0.32 | 0.5 | 0.1 | 0.05 | 13 | 22 | 33 | 44 | 90 | 135 | 220 | 265 | 355 | 442 | 530 | 885 | 1330 | 1730 | 2660 |
TPE | 110 | 3 | 0.7 | 0.7 | 0.1 | 0.02 | 13 | 20 | 30 | 40 | 85 | 125 | 205 | 250 | 330 | 413 | 495 | 826 | 1238 | 1650 | 1860 |
☆如何選擇所需之除濕機的機型:為達到*效率,
請取干燥能力表的 80%,
對照所需的原料及干燥能力,即可尋得正確的機型
例如:欲干燥 80kg/hr 的 PET,則 ND-300 即為適當的選擇
東莞市尼嘉斯塑膠機械有限公司:
尼嘉斯--節能管控,改觀現狀,異軍突起的思維
累積專業制造經驗--25年塑廠流程設備;
整體規劃*實力--南亞、臺塑、中華各大塑業集園(23年佳績);
行遍東南亞各國大廠--現場施作10T--2000T儲槽;
塑料專業流程經歷--與日本,德國,美國擠出成型設計配套!
東莞市尼嘉斯塑膠機械有限公司
地 址:廣東省東莞市常平鎮漱舊工業區工業二路1號
電 話:
手 機:
聯 系 人:梁
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份