18576673708
當前位置：深圳市新朗普電子科技有限公司>>涂層/線纜高度/激光測距測試儀>>英國易高Elcometer│材料檢測>> 112AL濕膜梳112AL濕膜梳│易高Elcometer【112AL沖壓鋁制濕膜測厚儀】
Elcometer 142 ISO 8502-3灰塵測試帶套裝
如有任何問題請與我司業務專員：
：豪
:fuhao@17Lp.com
英國易高Elcometer 112AL沖壓鋁制濕膜梳
這些沖壓鋁制濕膜梳成本低，用于測量濕膜厚度。
由于是用鋁材料沖壓而成，故精確度不如P.126的高精度測量儀。
每包共有10片濕膜梳，每片上一面為公制量程（25~3000μm），另一面為英制量程（1~118mils）。
ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film comb should be perpendicular to the substrate and the thickness of the coating should be stated as lying between the shortest wet tooth and the longest dry tooth.
Wet film combs have teeth of various lengths on their sides.
Place a comb perpendicular to, and touching the substrate. Hold the comb in position and wait a few seconds until the teeth are "wet." Remove the comb from the film.
The wet film thickness lies between the biggest value "coated" or "wet" tooth and the smallest value "uncoated" or "dry" tooth value Example In the diagram, 90 is the biggest value wet tooth and 100 is the smallest value dry tooth. Therefore, the wet film thickness is between 90 and 100 mil/thou. If the volume to solids ratio of the coating is known （if not contact the coating manufacturer） then the wet film thickness can be used to predict the dry film measurement. To use combs on pipes, measure along the longitudinal axis （lengthways） of the pipe. On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.
| 符合以下標準 | |
| ASTM D 4414-A | BS 3900-C5-7B |
| ISO 2808-7B | NFT 30-125 |
| 型號 | 分類 | 量程 | 零件號 |
| Elcometer 112AL | Elcometer 112AL沖壓鋁制濕膜梳（x10） | 25~3000μm1~118mils | B112AL12473-3 |
How to use a Wet film Comb - Elcometer Wet Film Measurement
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，環保在線對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
環保在線