污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
極云致成(北京)科技有限公司
無菌封管機
Tube-Sealer is a fully automated device,designed to produce permanent and consistent leak free seals on thermoplastic tubing.
The Tube-Sealer is used to disconnect thermoplastic tubing such as C-Flex®,Advantaflex®,FluiSoft®,SaniPure™ and PharMed®,on disposable bag assemblies used in biopharmaceutical manufacturing processes.Individual bags or bag assemblies can be disconnected in a non sterile environment by maintaining sterility of the product.
兩個加熱元器件對帶液或不帶液熱塑管進行擠壓,并對受擠壓熱塑管進行加熱。在熱量和擠壓雙重作用下,管子熔合成均勻密封截面,可用剪刀從中將管子斷開。
The inserted empty or liquid filled tube will be compressed and heated between two eating elements.The heat and the compression force will fuse the tube to a omogeneous section.This section can be cut in the middle by using sharp scissors.
一臺機器,可用于熱密封外徑1/4"-1"、壁厚1/16"-1/8"的熱塑管??蓪?nbsp; 現帶液密封,這使其非常適于與一次性袋配合使用。
One machine can be adapted to seal tube with outer diameter from 1/4"to 1"or with wall-thickness from 1/16"to 1/8".It also can be used to seal tube with liquid which makes it ideal for the implementation of Single Use Bag Technology.
一鍵選擇管徑、一鍵熱封、一鍵開蓋,操作便捷。
Easy to operate:One-button to select tube size,one-button to start sealing,and one-button to open the cover.
對于不同管徑和品牌的熱塑管,平均熱密封時間在1.5-4.5分鐘。
Depending on the tubing size and brand,the average sealing cycle times are between 1.5 to 4.5 minutes.
Tube-Sealer能確保在無菌條件下斷開熱塑管,熱密封具有比較好的穩定性。所有機器在發貨前均進行單獨測試,以確保機器穩定可靠。
The thermal seal produced by the Tube-Sealer ensures an extraordinary level of stability and guarantees sterile disconnections.All units are individually tested before dispatch to ensure maximum reliability.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份