I-1B型濃漿泵產品概述
I-1B系列濃漿泵是單螺桿式容積回轉泵,該泵利用偏心單螺旋的螺桿在雙螺旋襯套內的轉動,使?jié)鉂{液沿螺旋槽由吸入口推移至排出口,實現泵的輸送功能。結構材質型式：
I-1B型：殼體鑄鐵，傳動件為一般鋼材，適用于一般中性濃漿液輸送。
I-1B型：傳動件（主軸、螺桿和繞軸）為不銹鋼制造，適用于一般微酸、堿漿液輸送。
I-1B型：傳動件和接角漿液的泵殼均由不銹鋼制造，適用于食品、制藥及腐蝕性漿液的輸送。
橡膠襯套有一般耐磨橡膠，食品用橡膠和耐油橡膠供用戶選擇。
傳動方式有電機與泵軸直接傳動，電機經減速機與泵直接傳動和電機經三角皮帶輪與泵軸傳動供用戶選購。
配用電動機有一般封閉式、防爆式和電磁調速式電機。
I-1B型：殼體鑄鐵，傳動件為一般鋼材，適用于一般中性濃漿液輸送。
I-1B型：傳動件（主軸、螺桿和繞軸）為不銹鋼制造，適用于一般微酸、堿漿液輸送。
I-1B型：傳動件和接角漿液的泵殼均由不銹鋼制造，適用于食品、制藥及腐蝕性漿液的輸送。
橡膠襯套有一般耐磨橡膠，食品用橡膠和耐油橡膠供用戶選擇。
傳動方式有電機與泵軸直接傳動，電機經減速機與泵直接傳動和電機經三角皮帶輪與泵軸傳動供用戶選購。
配用電動機有一般封閉式、防爆式和電磁調速式電機。
Summary
The stud pump is that one kind of one stud type is lost the stud bush （ calling the stator ） that fortune pump and stud （ calling the rotor ） and interior surface that its major work parts are partiality spirochaetas assume the bifilar helix face . His work principle is when being moving when the electromotor drives the pump axle , and on the one hand the stud winds the axis of itself and revolves , on the other hand its again surface roll along the bush , so forming the close cavity room of pump . The stud is one week per revolution , and liquid in the close cavity pushes on forward a pitch . Along with the continuous transmission of stud , the shape method of liquid with the spiral is pressed to another close cavity from a close cavity , and finally crowds out the pump aspect.
The stud pump is the machinery of one kind of new transport liquid , and possesses that the structure is simple and work is safe and reliable and use to keep in repair convenient and goes out the merits such as liquid is continuously even and pressure is stable etc . The dense thick liquid pump of my unit production contacts altogether the metal part that the thing is expected all chooses the high quality not to become rusty the acidproof steel is made , axle material 2cr13 lines and tin uses nonpoisonous tasess rubber and work temperature 100 ℃s attainability , available in the transport foodstuff thick liquids and the viscosity 10000 moors this calorie of contains second solid anything small and roundish or glue piece the solution thick liquid , the corrosiveness medium of suspension liquid . Extensively in the Ministry of Industry such as foodstuff , metallurgy , building , pharmacy and chemical industry etc the doors Please paying attention to : The medium difference that the stud pump uses should use the different rubber .
The stud pump is that one kind of one stud type is lost the stud bush （ calling the stator ） that fortune pump and stud （ calling the rotor ） and interior surface that its major work parts are partiality spirochaetas assume the bifilar helix face . His work principle is when being moving when the electromotor drives the pump axle , and on the one hand the stud winds the axis of itself and revolves , on the other hand its again surface roll along the bush , so forming the close cavity room of pump . The stud is one week per revolution , and liquid in the close cavity pushes on forward a pitch . Along with the continuous transmission of stud , the shape method of liquid with the spiral is pressed to another close cavity from a close cavity , and finally crowds out the pump aspect.
The stud pump is the machinery of one kind of new transport liquid , and possesses that the structure is simple and work is safe and reliable and use to keep in repair convenient and goes out the merits such as liquid is continuously even and pressure is stable etc . The dense thick liquid pump of my unit production contacts altogether the metal part that the thing is expected all chooses the high quality not to become rusty the acidproof steel is made , axle material 2cr13 lines and tin uses nonpoisonous tasess rubber and work temperature 100 ℃s attainability , available in the transport foodstuff thick liquids and the viscosity 10000 moors this calorie of contains second solid anything small and roundish or glue piece the solution thick liquid , the corrosiveness medium of suspension liquid . Extensively in the Ministry of Industry such as foodstuff , metallurgy , building , pharmacy and chemical industry etc the doors Please paying attention to : The medium difference that the stud pump uses should use the different rubber .
I-1B型示意圖
I-1B型使用范圍
廣泛應用于化工、制藥、釀造、造紙、食品等單位。
1.可輸送高濃度高粘度（＜10000PaS）及含有顆粒的懸浮漿液。
2.輸送液流穩定，無過流、脈動及攪拌、剪切漿液現象。
3.排出壓力與轉速無關，低流量也可保持高的排出壓力。
4.流量與轉速成正比，通過變速機構或高速電機可實現流量調節。
5.自吸能力強，液體流向由泵的旋轉方向來改變，適用于管道需反、正向沖洗的場合。
6.運轉平穩、振動、噪聲小。
7.結構簡單、拆裝、維修方便。
1.可輸送高濃度高粘度（＜10000PaS）及含有顆粒的懸浮漿液。
2.輸送液流穩定，無過流、脈動及攪拌、剪切漿液現象。
3.排出壓力與轉速無關，低流量也可保持高的排出壓力。
4.流量與轉速成正比，通過變速機構或高速電機可實現流量調節。
5.自吸能力強，液體流向由泵的旋轉方向來改變，適用于管道需反、正向沖洗的場合。
6.運轉平穩、振動、噪聲小。
7.結構簡單、拆裝、維修方便。
螺桿泵（）是一種新型的輸送液體的機械，具有結構簡單、工作安全可靠、使用維修方便、出液連續均勻、壓力穩定等優點。我單位生產的凡接觸物料的金屬零件均選用優質耐酸不銹鋼制作，襯筒采用無毒無味的橡膠、工作溫度可達120℃，可用于輸送食品漿料和粘度10000泊斯卡·秒含有固體顆粒或膠塊的溶液漿，懸浮液的腐蝕性介質。廣泛用于食品、冶金、化工、印染、造紙、陶瓷等工業部門。
| 1 | 彎頭接管 | 5 | 三通泵體 | 9 | 空心泵軸 |
| 2 | 直筒 | 6 | 石棉填料 | 10 | 泵座 |
| 3 | 橡膠管 | 7 | 填料壓蓋 | 11 | 銷軸銷帽 |
| 4 | 螺桿泵 | 8 | 繞軸 | 12 | 聯軸器 |
I-1B型性能參數
| 型 號 | 理論流量 （m3/h） | 流量 （ T/時） | 揚程 （m） | 吸程 （m） | 進出口徑 | 轉速 （r/min） | 配用電機 （K/w） | 工作壓力 （kg/cm2） |
| 老型I-1B1寸 | 1.8 | 1.1 | 30 | 2 | 25 | 960 | 2.2 | 3 |
| I-1B1寸 | 2.39 | 1.5 | 50 | 2 | 25 | 960 | 1.1 | 5 |
| 老型I-1B1.5寸 | 4.8 | 3 | 80 | 2 | 40 | 960 | 3 | 8 |
| I-1B1.5寸 | 5.2 | 3.2 | 80 | 3 | 40 | 960 | 2.2 | 8 |
| I-1B2寸 | 8.85 | 5.6 | 80 | 3 | 50 | 960 | 3 | 8 |
| I-1B2.5寸 | 10.6 | 6.5 | 60 | 3 | 65 | 960 | 3 | 6 |
| 老型I-1B3寸 | 15 | 10 | 60 | 3 | 75 | 960 | 7.5 | 6 |
| I-1B3寸 | 18.1 | 12 | 60 | 3 | 75 | 960 | 5.5 | 6 |
| I-1B4寸 | 24 | 16 | 60 | 3 | 100 | 960 | 7.5 | 6 |
| I-1B5寸 | 36 | 25 | 60 | 3 | 125 | 960 | 11 | 6 |
| 老型I-1B5寸 | 27 | 19 | 60 | 3 | 125 | 960 | 11 | 6 |
| I-1B6寸 | 38 | 30 | 60 | 3 | 150 | 960 | 15 | 6 |
凱美泵業公司螺桿泵選型須知
一、產品名稱與型號，管道口徑，使用揚程（m），電機功率（KW），電機轉速（r/min），電壓〔V〕，使用的吸程（m），使用的介質名稱、比重、粘度、腐蝕性、毒性
二、若已經由設計單位選定我公司的型號，請按型號直接向凱美泵業公司營銷部訂購。
三、請盡量提供詳細的產品使用要求，以便我們選型的正確性，提高使用的率。
感謝您訪問凱美泵業的【http//www.kmb58.com】,如有任何疑問.您可以致電我公司營銷部，我們會用心做好每一件事情。
二、若已經由設計單位選定我公司的型號，請按型號直接向凱美泵業公司營銷部訂購。
三、請盡量提供詳細的產品使用要求，以便我們選型的正確性，提高使用的率。
感謝您訪問凱美泵業的【http//www.kmb58.com】,如有任何疑問.您可以致電我公司營銷部，我們會用心做好每一件事情。