10-300T/D噸榨油生產線設備
適用范圍：大豆，菜籽，棉籽，葵花籽，茶籽、亞麻籽，蓖麻籽，棕櫚仁，核桃、元寶楓籽等。
Scope of application: soybean, rapeseed, cottonseed, sunflower seed, tea seed, flax seed, castor seed, palm kernel, walnut, ingot maple seed, etc.
設備配置及功能：篩選機、去石機、軋胚機、蒸炒鍋、榨油機、濾油機、加熱系統和控制系統等。
Equipment configuration and function: screening machine, stone removing machine, rolling machine, steaming and frying pan, oil press, oil filter, heating system and control system, etc.
產品介紹:
此工藝采用大型螺旋榨油機制油，螺旋榨油機是目前應用較多的一種壓榨制油設備，它具有，連續化處理量大、動態壓榨時間短、出油率高、勞動強度低等優點.
采用壓榨（熱榨、冷榨）工藝、壓榨-浸出工藝、預榨-浸出工藝、直接浸出工藝。與油料品種、取油工藝、產品質量標準、油料綜合利用、投資規模等多種因素相關，因此有多種方案可供選擇。
油料的預處理是油脂制取過程的起點，包括倉儲、倉儲、干燥、清理、破碎、剝殼或去皮、調質、軋坯、蒸炒及膨化等，每一項都影響到出油率、成品油的質量及油餅的質量。根據油料品種、加工目的和含油量不同，預處理工序也相應不同。我公司掌握了各種油料的預處理方法，尤其是烘干、大豆脫皮、花生脫紅衣、軟化、壓榨、膨化等技術成熟。
預處理的目的：取得結構、出油率的料坯；得到佳的產品油脂和餅粕；提高設備處理能力、降低能耗以及提高經濟技術指標。
注意事項：
1、 采用靈活的工序組合，同一工藝可以加工多種油料。
2、 副產品的綜合利用。
3、 采用脫皮和低溫處理新技術，能保證蛋白含量高而且變性最少。
4、 對浸出困難、粉末大或要求提高產量的原料采用膨化處理，降低殘油和溶耗，產量提高50-80%。
5、 影響出油率的因素分兩類，油料：包括含油率、含雜量、物料大小、水分、溫度及油料細胞的破壞程度。機械：機械壓力、壓榨機械、壓榨溫度、料層厚度及排油阻力。
為滿足廣大用戶的需求，使用戶利潤。我公司以工藝合理設備成本低為基礎，針對大綜油料設計和制作不同的工藝及設備。提供一種油料多種工藝，一個工藝處理多種油料，一個工藝多種設備，成度的滿足用戶需求。
product description:
This process uses a large spiral oil extraction mechanism oil screw press is used more often in a press oil equipment, it has continuously processing a large amount of dynamic short press time, high oil, low labor intensity advantage.
Using the press (hot pressing, cold pressing) process, crushing - leaching technology, pre-press - leaching process, direct leaching process. And varieties of oil, a variety of factors to take oil technology, product quality standards, fuel utilization, investment and other related, therefore a variety of programs to choose from.
Pretreatment of oil is the starting point for oil preparation process, including warehousing, storage, drying, cleaning, crushing, peel or peeled, conditioning, billets, steamed and fried puffed like, each of which affects the oil yield , quality of the oil quality and oil cake. According to oil varieties, processing and oil content of different purposes, different pretreatment process accordingly. I mastered all kinds of oil pretreatment methods, especially drying, peeling soybeans, peanuts off the red, soften, pressing, extrusion and other advanced technology is mature.
Pretreatment purpose: to obtain the best structure, the highest oil yield blanks; to get the best quality products and oil meal; improve equipment processing capacity, reduce energy consumption and improve the economic and technical indicators.
Precautions:
1, a flexible combination of process, the same process can be processed more oil.
2, by-product utilization.
3, the use of low-temperature processing and peeling of new technologies to ensure a high protein content and the least variability.
4, leaching difficulties, powder or require a large increase production of raw materials using expanding treatment, and reduce the residual solvent loss, production increased by 50-80%.
5, the factors affecting the rate of two types of oil, oil: Including oil content, trash content, material size, moisture, temperature and oil damage cells. Mechanical: mechanical stress, mechanical pressing, pressing temperature, material thickness and drain resistance.
To meet the needs of users, allowing users to maximize profits. My company to lower process equipment reasonable cost basis for large mechanized fuel design and production of different processes and equipment. Oil provides a variety of techniques, a variety of treatment process oil, a variety of process equipment, to the maximum degree meet customer needs.
會員1.png)
