污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
深圳市鑫成通電子有限公司
深圳市鑫成通電子有限公司
DTE-1000
深圳市鑫成通電子有限公司供應DTE--27832121Designed to meet the most demanding requirements of today’s Digital Terrestrial Television Broadcast Marketsprocess.
General
Designed to meet the most demanding requirements of today’s Digital Terrestrial Television Broadcast Markets, A key factor in the products success is the quality of the coding and modulation process. The modular design makes the unit highly flexible and the modulator is easily adaptable to provide the exact features required in a specific application.
This means that you will only have to pay for the functional features that you need. Retrofitting of features is easy by uploading new firmware and software from a standard PC.
FEATURES
Full hierarchical mode support
SFN and MFN support
Near seamless switching between inputs
Superior MER performance
Outstanding linear and non-linear digital pre-correction
Web browser and SNMP remote control
Player Functionality
CHANNEL SELECT
Tunable to any UHF/VHF or cable channel.
LEVEL
Lets you adjust the RF level of the output for receiver stressing.
PLAY LIST RECALL
Will recall to the unit display and list of programs stored in the unit and on the DVD drive.
PLAY
Starts the selected program. The vacuum fluorescent display provides the program name, duration, channel, RF
level, and percent of content played.
RECORD
Activates the unit's ability to capture a video data stream.
Player Functionality
Signal processing
-Supported modes
-IFFT: 2K, 8K
-Guard intervals: ?, 1/8, 1/16, 1/32
-Code rates: ?, 2/3, ?, 5/6, 7/8
-Constellations: QPSK, 16-QAM, 64-QAM
-Network mode: MFN
-Bandwidth: 8MHz and 7MHz
-8MHz, 7MHz and 6MHz
Electrical specifications:
Inputs
* MPEG-2: Two ASI inputs, BNC 75ohm (four ASI inputs with option O-1002 installed)
* Clock reference (carrier frequency and SFN timing):
-Connector: BNC
-Frequency: 10MHz
-Level: 100mV-3Vpp
-Impedance: 50ohm/>1kohm, user selectable
* Time reference (SFN timing):
-Connector: BNC
-Frequency: 1 PPS
-Level: 0-5V
-Trigger: Positive transition
-Impedance: 50ohm/>1kohm, user selectable
Output (standard version):
* IF output:
-Connector: BNC 50 ohm
-Centre frequency: Adjustable 35-37MHz in steps of 1Hz
-Frequency stability: Intern ref 1ppm / or in accordance with extern ref accuracy
-Spectrum polarity: Inverted and non-inverted selectable via front panel menu
-Level: +6dBm (adjustable +2/-8dB)
-Stability: ±0,2dB
-Return loss: >26dB
-Spectrum outside bａnd (note 1):
+/-3,8MHz: 0dB
+/-4,25MHz: <48dB
+/-5,25MHz: <56dB
-Harmonics and spurious: <60dB relative to the total output power
-MER: designed to meet 45dB
Output (Option O-1001):
-IF output: As for standard version except centre frequency fixed 36MHz.
-RF output:
-Connector: N50 ohm
-Centre frequency: Adjustable 301000MHz in steps of 1Hz
-Frequency stability: Intern ref 1ppm / or in accordance with extern ref accuracy
-Spectrum polarity: Inverted and non-inverted selectable via front panel menu
-Level: +0dBm (adjustable +0 /-10dB)
-Stability: ±0,5dB
-Return loss: >16dB
-Spectrum outside bａnd (note 1):
+/-3,8MHz: 0dB
+/-4,25MHz: <47dB
+/-5,25MHz: <53dB
-Harmonics and spurious: <-50dBm below 1GHz
-MER: designed to mee40dB
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
