污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
上海微通流體控制技術有限公司
型號描述型號8715是一臺用于調節侵蝕性氣體質量流量的裝置,它需要一個與介質相分離的傳感器
型號描述
型號 8715 是一臺用于調節侵蝕性氣體質量流量的裝置,它需要一個與介質相分離的傳感器。在數字的電子調節設備中,會將傳感器提供的實際值與規定的額定值進行比較;存在調節偏差時,會通過一種 PI 調節算法對發送到比例閥上的調節參數進行修改。這樣一來,就可以將質量流量保持在一個確定的數值上,或使其遵循規定的曲線輪廓,而不會受到壓力波動或設備中其他變化的影響。 可針對兩種不同的氣體對型號 8715 進行校準,用戶可在兩者之間進行轉換。一個直動式比例閥作為調節元件,確保了高反應靈敏度和裝置良好的調節特性。通過數字方式與更高一級的設備進行通訊,這樣一來,就可以省去額外的 D/A 轉換。
1)采用毛細管技術的旁通儀器,適合額定流量范圍 5 mlN/min 至 15 lN/min
2)適合侵蝕性氣體
3)緊湊型版本和數字通訊
Type Description
The mass flow controller (MFC) type 8715 is especially suited for regulating the mass flow of aggressive gases, which need a sensor which is not in direct contact with the gas. The thermal capillary sensor reaches fast response times. A direct-acting proportional valve from Bürkert guarantees a high sensitivity. The integrated PI controller ensures outstanding control characteristics of the MFC. Type 8715 can optionally be calibrated for two different gases; the user can switch between these two gases. The communication with master devices is fully digital, therefore no further analog/digital conversions are needed.
1)Nominal flow ranges from 0.005 lN/min to 15 lN/min
2)High accuracy and repeatability
3)Applicable for aggressive gases
4)Digital communication via RS485
氣體質量流量控制器部分訂貨號如下:
請聯系在線客服!
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份