污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
北京德華振峽科技有限公司
北京德華振峽科技有限公司
FLZ機床校準顯微鏡 用于機床導軌的共軸調整和對中心，是機床裝配行業內工具之一。
The FLZ alignment tester is a transportable microscope for the alignment of machine guides.Set-up of the measuring instrumentThe measuring wire is fastened to the headstock or a special holding device, fed at the end of the base over a pulley and streched tight with a weight (layout according to DIN 8606).The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions.Technical descriptionThe microscope and the stａnd are connected by a dovetail guide. To bring the measuring wire into focus the microscope can be vertically adjusted by means of a pinion gear on the stand. Horizontally, the position of the microscope is recorded by a digital measuring system and indicated in a LCD display. Since horizontal movement is effected in the object plane, errors of the first order are ruled out. With a spirit level the alignment tester can be precisely installed in a horizontal position. The microscope, spirit level and plane mounting surface, which is provided with two drilled holes for the insertion of the fastening bolts, are aligned to each other. | ||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
