超高壓氮氣發生器1,代替了代價高昂的危險氣瓶2,顯著地節省氣瓶3,安裝簡單，無特殊要求4,*的控制和安全系統的自動轉換開關5,滿足所有的標準和法規
超高壓氮氣發生器
1,代替了代價高昂的危險氣瓶
2,顯著地節省氣瓶
3,安裝簡單，無特殊要求
4,*的控制和安全系統的自動轉換開關
5,滿足所有的標準和法規
Nitrogen-UHP-Generators
- Eliminates costly dangerous gas cylinders
- Significant savings over cylinders
- Simple installation, no special requirements
- Constant purity with no fall off in performance
- Sophisticated control and safety system with automatic changeover switch
- Meets all standards and regulations
Nitrogen-Generating with the PSA technologies
The Nitrogen Generators of the NG-UHP series are used for producing UHP nitrogen out of an in house air supply in the field or in the laboratory. The produced nitrogen has a purity of 99,9995%, with optional built in catalyst the THC content can be reduced to < 0,1 ppm (measured as methane). The generating of nitrogen is based on the pressure swing adsorption method (PSA). Under pressure oxygen molecules are retained in the micropores of the Carbon Molecular Sieve (CMS), the bigger nitrogen molecules are passing through the Carbon Molecuar Sieve. For molsieve regeneration the O2 - rich air mixture flows with a small amount of nitrogen counterflow across the to-be regenerated molsieve. Variable pressure is equalized with an internal buffer tank. This guarantees a reliable and ultra pure nitrogen-production with a constant inlet pressure. This proceeding is repeated permanently on a time to time basis and is nearly wear-free. To protect the whole unit against pollution out of the pressure system (oil, water, dust) the prefilter has to be changed once a year. The generators are fixed to the required parameters and tested on our testbench. Units with external oil-less compressor for permanent use (< 55 dBA) and units with integrated Oxygen analyser to supervise the gas quality are deliverable.
Applications
- ideal suitable for Carrier-Gas-applications (GC)
- blanketing solvents
- inerting
- chemical packaging
Nitrogen supply (ml/min) at inlet pressures from p = 8 bar abs.
| Type | N2 99,9995% | Dimensions (w x h x d) [cm] | | NG UHP 600 | 600 | 40 x 96 x 40 | | NG UHP 1000 | 1000 | 40 x 96 x 40 | | NG UHP 1500 | 1500 | 40 x 112 x 40 | | NG UHP 2000 | 2000 | 40 x 112 x 40 | | NG UHP 3000 | 3000 | 50 x 145 x 60 | | NG UHP 4000 | 4000 | 50 x 145 x 60 | | NG UHP 5000 | 5000 | 50 x 175 x 60 |
The oxygen content at a purity of 99,9995 % is < 5ppm O2. Hydrocarbons like methane can be reduced to < 0,1 ppm via additional catalytical chamber (option). | |
Units with the highest flowrate of 5000 ml/min are standard. Units with flowrates up to 50 l/min are available.
| Dewpoint | | -70 °CPartikel > 0,01 µm | | Particles > 0,01 µm | | none | | Electrical Requirements | | 230 V/50 Hz | | Min/ Max. inlet pressure | | 6 - 10 bar | | Max. pressure drop | | < 1 bar | | Recommended inlet temperature | | 20 °C | | Ambient-temperature | | 5 - 45 °C | | Ambient-pressure | | 1013 mbar | | Dimensions (W x D x H) | | 40 x 40 x 112 cm | | In/Outlet ports | | 6 mm Swagelok |
The qualitiy of compressed air is important for the lifetime of the generator. To guarantee a longlasting maintenance-free operation the use of quality air is recommended, which fullfills the following regulations: Air ISO 8573.1, Class 1.2.1; oil < 0,01 mg/m3; water < -40 °C dewpoint, particles < 0,1 µm.
Systems with external air compressor
All nitrogen generator models are available with an external low noise and oil-less air compressor for permanent use (< 55 dbA). |
