日韩午夜在线观看,色偷偷伊人,免费一级毛片不卡不收费,日韩午夜在线视频不卡片

行業產品

  • 行業產品

天津特魯斯科技有限公司


當前位置:天津特魯斯科技有限公司>>量儀>>平直度測量儀>>TL741垂直度測量儀 線面垂直度測量儀 機床垂直度測量儀

TL741垂直度測量儀 線面垂直度測量儀 機床垂直度測量儀

返回列表頁
參  考  價面議
具體成交價以合同協議為準

產品型號TL-741

品       牌

廠商性質其他

所  在  地

聯系方式:唐經理查看聯系方式

更新時間:2023-07-06 17:41:59瀏覽次數:154次

聯系我時,請告知來自 環保在線

產品簡介

TL-741超精密線面垂直度測量儀  天津特魯斯科技有限公司代理銷售美國的線面垂直度測量儀,測量準確快速,減少設備故障,提高運行效率!    1、概述:  TL-741超精密線面垂直度測量儀(激光幾何精度檢測系統)TL-740的基礎上增加了一個垂直光束,它能夠檢測各種設備或部件的垂直度、平面度和直線度

詳細介紹

  TL-741超精密線面垂直度測量儀

  天津特魯斯科技有限公司代理銷售美國的線面垂直度測量儀,測量準確快速,減少設備故障,提高運行效率!

  

  1、概述:

   TL-741超精密線面垂直度測量儀(激光幾何精度檢測系統)TL-740的基礎上增加了一個垂直光束,它能夠檢測各種設備或部件的垂直度、平面度和直線度。TL-741超精密線面垂直度測量儀是用于加工中心對設備進行檢測的理想儀器。連續旋轉的轉激光平面360o度掃描時平面精度為0.5角秒(0.002mm/M),90o掃描的精度為0.25角秒(0.001mm/M)。激光面與垂直光束的垂直精度為1角秒(0.005mm/M)。基座配有俯仰角、滾動角調節旋鈕和發光水準儀,水準儀精度為1角秒。激光器工作半徑為30.5m。 TL-741激光垂直度檢測儀測量儀(激光幾何精度檢測系統)TL-740的基礎上增加了一個垂直光束, TL-741超精密線面垂直度測量儀 能夠檢測各種設備或部件的垂直度、平面度和直線度。它是用于加工中心對設備進行檢測的理想儀器。

  

2、應用領域:

  普通水平機 兩個機械軸的垂直度檢測 機床或組裝管道的垂直度檢測 各種表面(方形、框架型、軌道形、法蘭型、圓形等)平面度的檢測 機床、導軌、大型軸承平面等的測量和水平調整 航空設備的水平度測量和地板校準 成型機的檢測 天線陣列的測量 加工中心(HBM、VBM、VTL、VMC、HMC、磨床等) 大型車床

  3、功能:各種設備及工件的垂直度、平面度、水平度和直線度檢測。4、特點:連續旋轉的轉激光平面360o度掃描時平面精度為0.5角秒(0.002mm/M),90o掃描的精度為0.25角秒(0.001mm/M)。激光面與垂直光束的垂直精度為1角秒(0.005mm/M)。 基座配有俯仰角、滾動角調節旋鈕和發光水準儀,水準儀精度為1角秒。激光器工作半徑為30.5m。 TL-741激光垂直度檢測儀測量儀的系統安裝調整時間大約為10分鐘。 用于對機床平面度和垂直度誤差進行測量和修正。 配套高精度單軸無線探測靶 A-1519,探測范圍為24.5 mm,分辨率為0.0005 mm。 超高精度單軸無線探測靶A-1520,探測范圍為10mm,分辨率為0.00025 mm。 標配水準儀的精度為2角秒(0.01 mm/M),使用高精度分裂棱鏡時,精度可達到1角秒。 探測靶具有動態數據顯示功能。 配套軟件 適用于微軟Windows95/98/XP系統,可以快速對數據進行采集和分析。 使用交流電源適配器或電池供電。 系統主要有激光自動掃描平面發射器L-741、無線探測靶、顯示器和附件組成 5、技術參數:重 量激光器:3.1 kg基座:4.54kg材 質激光器:鋁和不銹鋼激光類型可見二極管激光,波長670nm,光束直徑4.06mm激光功耗<0.9mW光束穩定性位移:0.005mm/小時/oC角度:0.36角秒/小時/oC光束直線度空氣噪聲中0.001mm/M±0.0003mm激光面平面度180°/360°掃描時:0.025 mm/M +/- 0.0025 mm90°掃描時:0.001 mm/M +/- 0.0013 mm激光面垂直度1角秒(0.0025mm/M)工作范圍半徑30.5m工作模式單光束或掃描平面電 源9V直流外部盒裝電源(2節電池)或115V交流電源適配器水準儀2個發光水準儀,精度為2角秒(0.01mm/M)使用分裂棱鏡可達到1角秒(0.005 mm/M)基座角度調整范圍粗調:+/- 1.5o細調:+/- 0.15o基座調整分辨率粗調:1.7角秒(0.25 mm/30M)細調:0.17角秒(0.025 mm/30M) Entry-Level Laser Alignment System for Leveling and Squaring MachineryThe TL-741 Ultra-Precision Levelscan®leveling and squaring laser is part of a line of more affordable, yet highly versatile and accurate machine alignment systems designed to quickly measure and correct machine geometry errors with minimal setup. An entry-level laser alignment system, the L-741 quickly finds and fixes flatness and squareness / plumb errors of most high-accuracy machine tools and other alignment applications.Unsurpassed Plane FlatnessOne of the critical components of any laser alignment system is the straightness or surface flatness of the laser beam or plane, as this is the reference from which the measurements are made.The TL-741 features the flattest laser plane in the world. Its continuously rotating laser plane is flat to 1/2 an arc second (0.00003"/ft or 0.002 mm/M) in a 360osweep and 1/4 arcsec in a 90osweep (0.000015"/ft or 0.001 mm/M).100' Squareness Measuring CapabilityIt also features a plumb laser that is square to the laser plane to within 1 arc second (0.00006"/ft or 0.005 mm /M). This plumb laser can be projected out 100' (30.5 M), allowing squareness of even the tallest machine in the world to be easily checked. The TL-741 laser alignment system also features 2 built-in level vials that are accurate to 1 arc second.New Line of Wireless TargetsAnother critical component of laser alignment systems is the resolution of the targets. This determines how close the measurements can be made.The TL-741 laser alignment system utilizes our new line of wireless targets (A-1519, A-1519HR and A-1520) that feature up to 0.00002" (0.0005 mm) resolution, large measuring ranges of up to 1" (25 mm) and an IR transmitter for wireless communication with our R-1309 Cassiopeia Readout, which can simultaneously display up to 4 targets.These targets are all powered by rechargeable batteries, are lightweight and can be used as digital height gages when used with precision inserts. And like all Ham laser alignment systems, the targets provide live alignment data so misalignment errors can be fixed without changing the setup! ApplicationsFor applications with tolerances of 0.00002"/ft or 0.0017 mm/M or higher, the TL-741's applications include:·Checking the flatness of almost any surface (squares, frames, ways, flanges, circles, etc.)·Measuring and leveling machine beds and ways, large bearing surfaces, and fabrications·Checking the squareness of any vertical machine axis or surface to a horizontal axis or surface·Checking plumb of an vertical surface up to 100 feet (30.5 meters)·Checking way twist and parallelism between horizontal surfaces·Measuring surfaces up to 200 feet (61 meters) long with 1 setup·Collecting data for and analyze lines of motion using our Machine Tool Geometry or Plane5 Software.Geometry Analysis SoftwareFor wireless recording and analyzing laser alignment system data, our color, 3-D surface flatness and squareness analysis software, Plane5, simplifies and streamlines the data analysis process. It can measure up to 7 different surfaces in one project setup file and present a color, 3-D graph of the flatness and squareness analysis for each surface. 的產品和服務,值得信賴!

  


感興趣的產品PRODUCTS YOU ARE INTERESTED IN

環保在線 設計制作,未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://www.kindlingtouch.com,All rights reserved.

以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,環保在線對此不承擔任何保證責任。 溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~
主站蜘蛛池模板: 新营市| 宁波市| 石楼县| 历史| 庆元县| 旌德县| 新龙县| 长顺县| 新竹县| 涟源市| 佛山市| 蕉岭县| 福泉市| 伊吾县| 长治市| 黑水县| 祁阳县| 嘉兴市| 昌平区| 东源县| 连江县| 乐陵市| 城固县| 浑源县| 博爱县| 镇安县| 博客| 仲巴县| 阳原县| 泸西县| 洛宁县| 图木舒克市| 台山市| 婺源县| 双柏县| 清新县| 临清市| 敖汉旗| 天等县| 获嘉县| 曲麻莱县|