| 訂貨號 | 描述 | 數量 |
| 14857 | O-ring EPDM 3 x 6 mm internal O-ring for clamping device D=6 / 12mm D=6 / 19mm O型圈EPDM，3x6 mm | 2 |
| 26043 | EPDM O-Ring D=2x24 for 28mm port (Vessel NW200) O型圈EPDM，2x24 mm，用于28mm罐口（NW200罐體） | 1 |
| 29402 | EPDM O-Ring D=1.5x5 for reagent inlet pipes (Vessel NW200) O型圈EPDM，1.5x5mm，用于試劑入口（NW200罐體） | 4 |
| 26049 | Silikon O-Ring D=5.33x234 for Vessel holder (bottom) O型圈，D=5.33x234，用于罐體底部支撐 | 1 |
| 25694 | Silicone tubing D= 6 x 12 mm L= 11 mm (in Clamping devices D=6 & 6.5 / Pg13.5) 硅膠管D= 6x12 mm L= 11 mm | 2 |
| 25695 | Silicone tubing D= 6 x 12 mm L= 17 mm (in Clamping devices D=6 & 6.5 / 19mm) 硅膠管D= 6x12 mm L= 17mm | 2 |
| 26376 | Flat seal D= 42 x 32 x 2 for Reagent Bottles GL45 試劑瓶D= 42x32x2，GL45 | 6 |
| 15560 | Injection needle 0.90 x 38 mm with Luer connector (used in sampling system) 注射針，0.90x38 mm，帶有螺紋接口，用于采樣系統 | 1 |
| 21978 | Single use filter, air in, 0.2um D= 37mm (red) air inlet fitler for sparger, head space 0.2um過濾器，紅色標記，D=37mm，用于步吸器的進氣口 | 2 |
| 21979 | Single use filter, air out, 0.45um D= 37mm (green) air outlet filter for exit gascooleroutlet 0.45um過濾器，綠色標記，D= 37mm，用于氣體冷凝系統的出氣口 | 1 |
| 12994 | Single use filter, air in, Acro 50TF 0.2 (air in for high gasflowse.g.VesselsNW200,orairoutlet for absolute sterility) 過濾器，Acro 50TF 0.2um | 1 |
| 25785 | Tubing connectors 1/8" x 1/8", set of 10 pieces (for Pump tubing id 2.5mm) 接口，1/8"x1/8"，10個，用于內徑2.5mm的泵管 | 1 |
| 28105 | Tubing connector 3/32 x 1/16, set of 10 pieces (for Pump tubing id 1mm) 接口，3/32x1/16，10個，用于內徑1mm的泵管 | 1 |
| 19740 | Cable ties 15 mm black (for connecting Pump tubing) 黑色扎帶，15mm | 100 |
| 63325 | Hose clamp size 14 (with screw) gas connection 4x2= 8 e.g. for 3+1 gasmix (Standard forCell) 喉箍，14mm，用于氣體管路 | 8 |
| 13630 | Hose clamp size 17 (with hａnd screw) for Water in 喉箍，17mm，用于進水口 | 2 |
| 13631 | Hose clamp size 19 (with hａnd screw) Water out (drain) 喉箍，19mm，用于出水口 | 1 |
| 18142 | Silicone pressure tube D= 9.5 x 17 mm (red) Water out (drain) 紅色硅膠壓力管，D=9.5x17 mm，出水管路 | 2m |
| 21493 | 2m of silicone pressure tube D= 8 x 14.5 mm (red) for Water in 紅色硅膠壓力管，D= 8×14.5 mm，進水管理 | 2m |
| 18156 | Silicone pressure tube 6 x 12 mm (red) for gas connection 4x 2m = 8mfor3+1gasmix(Standard for Cell) 紅色硅膠壓力管，D=6x12mm，氣路連接 | 8m |
| 63321 | Silicone tube D= 2 x 6 mm (pack of 15m)forreagentbottletopumps&pumpstoTopPlateinlet 硅膠管D=2x6mm,15m，試劑瓶和泵、泵和罐體頂部的連接 | 1 |
| 10453 | Silicone tube 3 x 5 mm for sampling systems, Pipe mechanical seal 硅膠管D=3x5mm，采樣系統及機械密封處管路連接 | 1m |
| 18958 | Silicone tube 5 x 8 mm for Rotameter to filter & filter to sparger, head space option 硅膠管D=5×8mm，轉子流量計和過濾器、過濾器和步吸器之間的連接 | 2m |
| 14129 | Silicone tube D= 10 x 16 mm (transparent) for connection glass vessel doubbleJacketglass Vessel* 硅膠管D=10x16mm，玻璃夾套和主機的連接 | 1.5m |
| 11478 | Screw Imbus M4 x 4 for fitting impellors & magnetic coupling with schaft , Schaft holder (magnetic system) | 6 |
| 13845 | Screw Imbus M4 x 6 for fitting impellors (NW200) with schaft M4 x 6 | 4 |
環保在線