主要特點

?任意位置清零(ON/O)

?公英制轉換(mm/in)

?記錄連續測量過程中的值(MAX)

?測量時，按下M鍵，進入HOLD狀態，屏幕保留此時的測量值

?記錄連續測量過程中的最小值(MIN)

?記錄連續測量過程中的值(MAX)與最小值(MIN)之差(△=MAX-M I N))，用于平面度和同軸度的測量

?測量過程中根據設置的上下極限尺寸自動判定工件是否合格(TOL)，不依賴操作人員的記憶

?以方式測量(ABS)，量表讀出來的數據即為工件的實際尺寸

?以相對方式測量(REL)，量表讀出來的數據不是工件的實際尺寸，只是一個相對值

?測量的數據可通過數據采集系統進行數據傳輸(DATA)

?USB數據線插頭和電池蓋板都用螺釘緊固，保證連接更可靠

?數顯部分可旋轉300度，便于讀數。

FEATURES

?Zero-setting at any position (ON/O)

?mm/inch conversion at any position(mm/in)

?press M button ,LCD holds the measuring result (M)

?Hold the max reading during measurement (MAX)

?Hold the  minimum reading during measurement (MIN)

?Tracing the balance between Max and Min value (△=MAX—MIN)

?TOL Setting can check if the item is regular (TOL)

?Absolute zero measurmrnts

?Relative zero measurements

?Measuring value can be transmitted to PC (DATA)

?Screw USB interface and battery cover

?LCD-display can be rotated by up to 300°to guarantee an optimum reading position