污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
恩德斯豪斯(中國)
產品規格參數測量誤差質量流量(液體):±0
質量流量(液體):±0.10 %(標準)、0.05 %(可選)
體積流量(液體):±0.10 %
質量流量(氣體):±0.35 %
密度(液體):±0.0005 g/cm3
0...2 200 000 kg/h (0...80 840 lb/min)
標準型:–50...+150 °C (–58…+302 °F)
可選:–50...+240 °C (–58…+464 °F)
高溫型:–50...+350 °C (–58…+662 °F)
可選:–196...+150 °C (–320...+302 °F)
PN 100,Cl. 600,63K
測量管:1.4539 (904L)、1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金
連接部分:1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金、1.4301 (F304)
質量流量(液體):±0.10 %(標準)、0.05 %(可選)
體積流量(液體):±0.10 %
質量流量(氣體):±0.35 %
密度(液體):±0.0005 g/cm3
0...2 200 000 kg/h (0...80 840 lb/min)
標準型:–50...+150 °C (–58…+302 °F)
可選:–50...+240 °C (–58…+464 °F)
高溫型:–50...+350 °C (–58…+662 °F)
可選:–196...+150 °C (–320...+302 °F)
PN 100,Cl. 600,63K
測量管:1.4539 (904L)、1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金
連接部分:1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金、1.4301 (F304)
科里奧利質量流量
Flowmeter with premium accuracy, robustness and a compact, easily accessible transmitter.
Highest measurement performance for liquids and gases under varying, demanding process conditions.
Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. Remote display available.
DN 8...250 (?...10")
測量管:1.4539 (904L)、1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金
連接部分:1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金、1.4301 (F304)
質量流量、密度、溫度、體積流量、校正體積流量、參考密度、濃度
質量流量(液體):±0.10 %(標準)、0.05 %(可選)
體積流量(液體):±0.10 %
質量流量(氣體):±0.35 %
密度(液體):±0.0005 g/cm3
0...2 200 000 kg/h (0...80 840 lb/min)
PN 100,Cl. 600,63K
標準型:–50...+150 °C (–58…+302 °F)
可選:–50...+240 °C (–58…+464 °F)
高溫型:–50...+350 °C (–58…+662 °F)
可選:–196...+150 °C (–320...+302 °F)
標準:–40...+60 °C (–40...+140 °F)
可選:–50...+60 °C (–58...+140 °F)
標準:1.4301 (304)
可選:1.4404 (316/316L)
帶鋁合金AlSi10Mg涂層:1.4409 (CF3M),類似316L;不銹鋼或衛生型變送器外殼
一體式儀表:IP66/67, type 4X
外接WLAN天線:IP67
IP69
四行背光顯示,觸摸鍵操作(外部操作)
通過現場顯示屏和調試軟件設置
提供分離型顯示單元
3路輸出:
4...20 mA HART(有源/無源)
4...20 mA WirelessHART
4...20 mA(有源/無源)
脈沖/頻率/開關量輸出(有源/無源)
雙脈沖輸出(有源/無源)
繼電器輸出
狀態輸入
4...20 mA輸入
HART、PROFIBUS PA、FOUNDATION Fieldbus、Modbus RS485、Profinet、Ethernet/IP、OPC-UA
24 VDC
100...230 VAC
100...230 VAC / 24 VDC(非危險區)
ATEX、IECEx、cCSAus、NEPSI、INMETRO、EAC
CE認證、C-tick認證、EAC認證
功能安全遵循IEC 61508標準,允許在IEC 61511標準規定的安全應用中使用
在認證標定裝置上執行標定(符合ISO/IEC 17025標準)
Heartbeat Technology(心跳技術)符合ISO 9001:2008標準章節7.6 a的溯源校驗要求(TüV認證)
MI-005非水液體(碳水化合物、低溫液體)
NTEP(非水液體、LPG、低溫液體)
LR approval, DNV GL approval, ABS approval, BV approval, CCS approval
PED、CRN、AD 2000
3.1材料證書
NACE MR0175/MR0103,PMI,焊接測試遵循EN ISO、ASME、NORSOK標準
3-A、EHEDG
科里奧利質量流量
Flowmeter with premium accuracy, robustness and a compact, easily accessible transmitter.
Highest measurement performance for liquids and gases under varying, demanding process conditions.
Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. Remote display available.
DN 8...250 (?...10")
測量管:1.4539 (904L)、1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金
連接部分:1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金、1.4301 (F304)
質量流量、密度、溫度、體積流量、校正體積流量、參考密度、濃度
質量流量(液體):±0.10 %(標準)、0.05 %(可選)
體積流量(液體):±0.10 %
質量流量(氣體):±0.35 %
密度(液體):±0.0005 g/cm3
0...2 200 000 kg/h (0...80 840 lb/min)
PN 100,Cl. 600,63K
標準型:–50...+150 °C (–58…+302 °F)
可選:–50...+240 °C (–58…+464 °F)
高溫型:–50...+350 °C (–58…+662 °F)
可選:–196...+150 °C (–320...+302 °F)
標準:–40...+60 °C (–40...+140 °F)
可選:–50...+60 °C (–58...+140 °F)
標準:1.4301 (304)
可選:1.4404 (316/316L)
帶鋁合金AlSi10Mg涂層:1.4409 (CF3M),類似316L;不銹鋼變送器外殼
一體式儀表:IP66/67, type 4X
外接WLAN天線:IP67
IP69
四行背光顯示,觸摸鍵操作(外部操作)
通過現場顯示屏和調試軟件設置
提供分離型顯示單元
3路輸出:
4...20 mA HART(有源/無源)
4...20 mA WirelessHART
4...20 mA(有源/無源)
脈沖/頻率/開關量輸出(有源/無源)
雙脈沖輸出(有源/無源)
繼電器輸出
狀態輸入
4...20 mA輸入
HART、PROFIBUS PA、FOUNDATION Fieldbus、Modbus RS485、Profinet、Ethernet/IP、OPC-UA
24 VDC
100...230 VAC
100...230 VAC / 24 VDC(非危險區)
ATEX、IECEx、cCSAus、NEPSI、INMETRO、EAC
CE認證、C-tick認證、EAC認證
功能安全遵循IEC 61508標準,允許在IEC 61511標準規定的安全應用中使用
在認證標定裝置上執行標定(符合ISO/IEC 17025標準)
Heartbeat Technology(心跳技術)符合ISO 9001:2008標準章節7.6 a的溯源校驗要求(TüV認證)
MI-005非水液體(碳水化合物、低溫液體)
NTEP(非水液體、LPG、低溫液體)
LR approval, DNV GL approval, ABS approval, BV approval, CCS approval
PED、CRN、AD 2000
3.1材料證書
NACE MR0175/MR0103,PMI,焊接測試遵循EN ISO、ASME、NORSOK標準
3-A、EHEDG
科里奧利質量流量
Flowmeter with premium accuracy, robustness and a compact, easily accessible transmitter.
Highest measurement performance for liquids and gases under varying, demanding process conditions.
Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. Remote display available.
DN 8 to 250 (? to 10")
Measuring tube: 1.4539 (904L); 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022)
Connection: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022); 1.4301 (F304)
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
Mass flow (liquid): ±0.10 % (standard), 0.05 % (option)
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.25 %
Density (liquid): ±0.0005 g/cm3
0 to 2 200 000 kg/h (0 to 80 840 lb/min)
PN 100, Class 600, 63K
Standard: –50 to +150 °C (–58 to +302 °F)
Option: –50 to +240 °C (–58 to +464 °F)
High temperatur option: –50 to +350 °C (–58 to +662 °F)
Option: –196 to +150 °C (–320 to +302 °F)
Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F)
Standard: 1.4301 (304)
Option: 1.4404 (316/316L)
AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; stainless steel for hygenic transmitter design
Compact version: IP66/67, type 4X enclosure.
External WLAN antenna: IP67
IP69
4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
Remote display available
3 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
Status input
4-20 mA input
HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex
科里奧利質量流量
Flowmeter with premium accuracy, robustness and a compact, easily accessible transmitter.
Highest measurement performance for liquids and gases under varying, demanding process conditions.
Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. Remote display available.
DN 8...250 (?...10")
測量管:1.4539 (904L)、1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金
連接部分:1.4404 (316/316L)、Alloy C22 2.4602 (UNS N06022)合金、1.4301 (F304)
質量流量、密度、溫度、體積流量、校正體積流量、參考密度、濃度
質量流量(液體):±0.10 %(標準)、0.05 %(可選)
體積流量(液體):±0.10 %
質量流量(氣體):±0.35 %
密度(液體):±0.0005 g/cm3
0...2 200 000 kg/h (0...80 840 lb/min)
PN 100,Cl. 600,63K
標準型:–50...+150 °C (–58…+302 °F)
可選:–50...+240 °C (–58…+464 °F)
高溫型:–50...+350 °C (–58…+662 °F)
可選:–196...+150 °C (–320...+302 °F)
標準:–40...+60 °C (–40...+140 °F)
可選:–50...+60 °C (–58...+140 °F)
標準:1.4301 (304)
可選:1.4404 (316/316L)
衛生型變送器設計:鋁合金AlSi10Mg涂層;1.4409 (CF3M),類同316L;不銹鋼
一體式儀表:IP66/67, type 4X。
外接WLAN天線:IP67
IP69
四行背光顯示,觸摸鍵操作(外部操作)
通過現場顯示屏和調試軟件設置
提供分離型顯示單元
3路輸出:
4...20 mA HART(有源/無源)
4...20 mA WirelessHART
4...20 mA(有源/無源)
脈沖/頻率/開關量輸出(有源/無源)
雙脈沖輸出(有源/無源)
繼電器輸出
狀態輸入
4...20 mA輸入
HART、PROFIBUS PA、FOUNDATION Fieldbus、Modbus RS485、Profinet、Ethernet/IP、OPC-UA
24 VDC
100...230 VAC
100...230 VAC / 24 VDC(非危險區)
ATEX、IECEx、cCSAus、NEPSI、INMETRO、EAC
CE認證、C-tick認證、EAC認證
功能安全遵循IEC 61508標準,允許在IEC 61511標準規定的安全應用中使用
在認證標定裝置上執行標定(符合ISO/IEC 17025標準)
Heartbeat Technology(心跳技術)符合ISO 9001:2008標準章節7.6 a的溯源校驗要求(TüV認證)
MI-005液體,不同于水(碳水化合物、低溫液體)
NTEP(非水液體、LPG、低溫液體)
LR approval, DNV GL approval, ABS approval, BV approval, CCS approval
PED、CRN、AD 2000
3.1材料證書
NACE MR0175/MR0103,PMI,焊接測試遵循EN ISO、ASME、NORSOK標準
3-A、EHEDG
科里奧利質量流量
Flowmeter with premium accuracy, robustness and a compact, easily accessible transmitter.
Highest measurement performance for liquids and gases under varying, demanding process conditions.
Highest process safety – immune to fluctuating and harsh environments. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Mass flow: measurement error ±0.05 % (PremiumCal). Medium temperature: –196 to 350 °C (–320 to 662 °F). Nominal diameter: DN 8 to 250 (3?? to 10").
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. Remote display available.
DN 8 to 250 (? to 10")
Measuring tube: 1.4539 (904L); 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022)
Connection: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022); 1.4301 (F304)
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
Mass flow (liquid): ±0.10 % (standard), 0.05 % (option)
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.25 %
Density (liquid): ±0.0005 g/cm3
0 to 2 200 000 kg/h (0 to 80 840 lb/min)
PN 100, Class 600, 63K
Standard: –50 to +150 °C (–58…+302 °F)
Option: –50 to +240 °C (–58…+464 °F)
High temperatur option: –50 to +350 °C (–58…+662 °F)
Option: –196 to +150 °C (–320 to +302 °F)
Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F)
Standard: 1.4301 (304)
Option: 1.4404 (316/316L)
AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; stainless steel for hygenic transmitter design
Compact version: IP66/67, type 4X enclosure.
External WLAN antenna: IP67
IP69
4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
Remote display available
3 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
Status input
4-20 mA input
HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex
CE, C-tick, EAC marking
Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TüV SüD attestation)
MI-005 (Liquids other than water, Hydrocarbons, LPG, cryogenic liquids)
NTEP (Liquids other than water, LPG, cryogenic liquids)
MC (Liquids other than water, cryogenic liquids)
MI-002, PTB
LR approval, DNV GL approval, ABS approval, BV approval, CCS approval
PED, CRN, AD 2000
3.1 material
NACE MR0175/MR0103, PMI; welding test acc. to EN ISO, ASME, NORSOK
3-A, EHEDG, cGMP
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份