Features

Supports 3 major platforms.
Can easily evaluate various sensing functions.

Easily implement development of new IoT applications and PoC
that senses a wide variety of environmental information.
About Sensor evaluation board

  • Six types of sensing functions

    Evaluation board with six types of sensing functions: temperature, humidity, light, air pressure, noise, and acceleration.

    Equipped Sensors >>
    Six types of sensing functions

  • Can be connected to OMRON sensors

    The product can be connected to OMRON sensors: MEMS thermal sensor, MEMS flow sensor, light convergent reflective sensor, air quality sensor, etc.

    External Expansion Sensor >>
    Can be connected to OMRON sensors

  • Includes a connector that supports Qwiic sensors

    Can be connected to a variety of sensors using Qwiic connection system.

  • Supports 3 platforms

    The product can be connected to a Raspberry Pi?1, Arduino?2, or Feather?3 baseboard, and enables easy sensor evaluation.

Ordering Information

  • RP typeGithub
    RP type
    2JCIE-EV01-RP1
    Raspberry Pi?1
    [ Models ]
    3 A / 1 B+ / 2 B / 3 B / 3 B+ /
    Zero / Zero W
  • AR typeGithub
    AR type
    2JCIE-EV01-AR1
    Arduino?2
    [ Models ]
    MKR Vidor 4000 /
    MKR WiFi 1010 /
    MKR ZERO
  • FT typeGithub
    FT type
    2JCIE-EV01-FT1
    Feather?3
    [ Models ]
    HUZZAH32

Attention

  • DO NOT make available or sell to third parties any product, system or service in which this PRODUCT is integrated. This PRODUCT is provided only for the purpose of evaluation, research, development, experiment and demonstration.

  • Read and agree to the China's "Terms & Conditions" by region website. Beginning to use this PRODUCT is regarded as your acceptance to the "Terms & Conditions".

  • Omron’s exclusive warranty is that the products will be free from defects in materials and workmanship for a period of a week from the date of sale by Omron (or other such period expressed in writing by Omron). Omron disclaims all other warranties, express or implied.
    Please be careful about the difference of warranty conditions.

  • Boards for supported platforms are not included.

  • The thermal sensor on the sensor evaluation board may output a high value due to heat generated by the platform. If you need to eliminate this effect, either separate the sensor from the unit by connecting a cable or otherwise, or use an external temperature/humidity sensor that supports SparkFun Qwiic.

  • Do not use a model other than those listed in each table of platform supporting models.

Supported Accessories (Sold Separately)

TypeModel
Cable harness2JCIE-HARNESS-01
2JCIE-HARNESS-02
2JCIE-HARNESS-03
2JCIE-HARNESS-04
2JCIE-HARNESS-05

Equipped Sensor

SensorPart number?4ModelManufacturerInterface
Temperature / humidity sensorU1SHT30-DIS-BSensirionI2C
Ambient light sensorU2OPT3001DNPTexas InstrumentsI2C
MEMS digital barometric pressure sensorU32SMPB-02EOMRONI2C
MEMS digital motion sensorU5LIS2DW12STMicroelectronicsSPI
MEMS microphoneU6SPH0645LM4H-BKnowlesI2S
Attention

  • When using the sensor evaluation board, the accuracy indicated on the data sheet of each sensor manufacturer is not guaranteed.

External Expansion Sensor ?5

ManufacturerProductModelSupported connector?4Supported accessories
(sold separately)
RP typeAR TypeFT type
OMRONMEMS thermal sensorD6T-44L-06/-HCN52JCIE-HARNESS-01
D6T-8L-09/-H
D6T-1A-01
D6T-1A-02
D6T-32L-01A
MEMS flow sensorD6F-PH0025AD1CN42JCIE-HARNESS-02
D6F-PH0505AD3
D6F-PH5050AD3
D6F-10A7D-000-0CN42JCIE-HARNESS-03
D6F-20A7D-000-0
D6F-50A7D-000-0
D6F-70AB7D-000-0
Light convergent reflective sensorB5W-LB2101-1-CN8TH22JCIE-HARNESS-04
Air quality sensorB5W-LD00101-1/-2CN7TH22JCIE-HARNESS-05
Attention

  • When an external expansion sensor is connected to the sensor evaluation board, the current supply ability of the platform board may be exceeded.

  • Consider supplying power using an external power supply. Check current supply ability in the data sheet and other literature of each platform board.

  • When using an external power supply, check the Jumper Function information on page 8 of “2JCIE-EV Datasheet" and use jumper switching.

?1.
Raspberry Pi is a registered trademark of the Raspberry Pi Foundation.
?2.
Arduino is a registered trademark of Arduino LLC and Arduino SRL.
?3.
Feather is a registered trademark of Adafruit Industries LLC.
?4.
For details on Part numbers and Supported connector, see the terminal layouts on page 4 to 6 of “2JCIE-EV Datasheet"
?5.
We have checked the operation of typical models of each sensor.

Buy or Contact

Please utilize the below "Contact Us Form" if you have any questions or comments regarding this product.

Contact us form