產品型號：JSH0202產品名稱：石油和合成液水分離性測定儀(JSH0202)產品說明：JSH0202石油和合成液水分離性測定儀一、符合GB/T7305、ASTMD1401、ISO6614標準二、主要技術參數控溫方式：進口數顯溫控儀自動控溫控溫范圍：常溫～82℃控溫精度：±0

詳細介紹

產品型號：JSH0202

產品名稱：石油和合成液水分離性測定儀(JSH0202)

產品說明：

JSH0202石油和合成液水分離性測定儀

一、符合GB/T7305、ASTMD1401、ISO6614標準

二、主要技術參數

控溫方式：進口數顯溫控儀自動控溫

控溫范圍：常溫～82℃

控溫精度：±0.5℃

水浴尺寸：φ300×300（mm）玻璃缸

試驗孔數：5孔

功率：2 KW

試樣攪拌：1500±15轉/分（數顯計速）

計時方式：數顯時間計時器

工作電源： AC220V±10% 50Hz

三、性能及特點

1、采用進口溫控儀自動控溫，顯示直觀清晰，可在常溫到100℃內選擇任意一點溫度，控溫準確；

2、采用電熱管加熱，加熱速度快，使用壽命長；

3、用來攪拌試樣的攪拌電機轉速為1500±15轉/分，且保證攪拌葉片最下端擺動小于1mm；

4、采用智能數顯計測器進行計時和計速，顯示直觀，操作方便；

5、在工作時可同時插入五支量筒，當支攪完后，可旋轉攪拌頭圓盤，讓電機攪拌第二支量筒內的試樣，完后同樣再攪拌第三支量筒內的試樣，依此類推。

JSH0202 oil and synthetic liquid water separation tester

One, in line with GB/T7305, ASTMD1401, ISO6614 standard

Ii. Main technical parameters

Temperature control mode: Automatic temperature control with imported digital display temperature controller

Temperature control range: normal temperature ~ 82℃

Temperature control accuracy: ±0.5℃

Water bath size: 300×300 (mm) glass cylinder

Number of test holes: 5

Power rate: 2 KW

Sample mixing: 1500±15 RPM (digital display speed)

Timing: Digital display time timer

Power supply: AC220V±10% 50Hz

Iii. Performance and Characteristics

1. Adopt the imported temperature controller to automatically control the temperature, the display is intuitive and clear, and the temperature can be selected at any point within the normal temperature to 100℃, and the temperature control is accurate;

2, using electric heat pipe heating, heating speed, long service life;

3. The speed of the stirring motor used for stirring samples is 1500±15 RPM, and the oscillation of the lowest end of the stirring blade is guaranteed to be less than 1mm;

4. Using intelligent digital display meter for timing and speed measurement, intuitive display, easy operation;

5. When working, five measuring cylinders can be inserted at the same time. After the first one is stirred, the agitator head disk can be rotated so that the motor can stir the samples in the second measuring cylinder.