JSR2901 petroleum products closed flash point tester (Martin closed cup method)
I. Comply with GB/T261, ASTM D93, ISO2719 standards
Ii. Main Technical parameters:
Heating power: adjustable from 0 ~ 300W
Stirring method: electric stirring (two-speed conversion between A and B)
Ignition mode: manual ignition
Power supply: AC220V±10% 50HZ
Iii. Performance and Characteristics:
1. Electronic solid-state voltage regulation is adopted for heating. The voltage is adjusted arbitrarily by 0~220V and controlled by a potentiometer.
2. Stirring is carried out by motor, and is equipped with two-speed A and B conversion.
3. Air-cooled the oil samples after the test;
4. The electric heater protection device is installed. When the oil cup is put on the electric heater, the electric heater will be electrified and heated automatically.