產品型號：JSR2402產品名稱：噴氣燃料銀片腐蝕試驗儀(JSR2402)產品說明：JSR2402噴氣燃料銀片腐蝕試驗儀一、符合SH/T0023標準二、主要技術參數控溫范圍：常溫～60℃控溫精度：±0

詳細介紹

產品型號：JSR2402

產品名稱：噴氣燃料銀片腐蝕試驗儀(JSR2402)

產品說明：

JSR2402噴氣燃料銀片腐蝕試驗儀

一、符合SH/T0023標準

二、主要技術參數

控溫范圍：常溫～60℃

控溫精度：±0.5℃

孔數：四孔

主機功率：1 KW

恒溫浴功率：1.15KW

工作電源：AC220V±10% 50HZ

三、性能及特點：

1、采用電熱管加熱方式，加熱速度快；

2、儀器主機（熱浴）采用數顯溫控器，溫度能控制在常溫～60℃范圍內任何一點，控溫精度達±0.5℃；

3、儀器冷凝器冷凝水采用循環恒溫水浴（冷浴）恒溫，當浴內水溫不在20±5℃范圍內時，可通過加熱或壓縮機致冷冷卻，使其達到20±5℃范圍；

4、可同時做四個對比樣。

JSR2402 jet fuel silver sheet corrosion tester

I. Comply with SH/T0023 standard

Ii. Main technical parameters

Temperature control range: normal temperature ~ 60℃

Temperature control accuracy: ±0.5℃

Number of holes: four

Main engine power: 1 KW

Constant temperature bath power: 1.15KW

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1. Adopt electric heat pipe heating mode, heating speed is fast;

2. The main machine (hot bath) adopts digital display temperature controller. The temperature can be controlled at any point within the range of normal temperature ~ 60℃, and the temperature control accuracy is ±0.5℃;

3. The condensate of the condenser of the instrument adopts a constant temperature of circulating thermostatic water bath (cold bath). When the water temperature in the bath is not within the range of 20±5℃, it can be cooled by heating or refrigeration by compressor to make it reach the range of 20±5℃;

4. Four comparison samples can be made at the same time.

關鍵詞：冷凝器壓縮機