污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
科海思（北京）科技有限公司
科海思（北京）科技有限公司
提取*用離子交換樹脂適用提取*，生物制藥等
Tulsion® A-722 MP ISO-9001/ISO-14001/OHSAS-18000
食品級提取*大孔吸附型離子交換樹脂
STYRENIC MACROPOROUS STRONG BASE ANION EXCHANGE RESIN FOR SUGAR DECOLOURIZATION AND ORGANIC REMOVAL.
Tulsion® A-722 MP is a polystyrenic “Macroporous” strong base (Type-I) anion exchange resin, with matrix containing quaternary ammonium groups, supplied as moist spherical beads in the Chloride form.
Tulsion® A-722 MP has excellent physical characteristics due to its macro porous nature, is used for de-colorization of sugars solutions, where the concentrations of the coloring bodies are relatively high. This resin is easily regenerable by using alkaline brine solution. This resin is generally used in combination with Tulsion® A-30MP acrylic strong base for the removal of residual color from the treated sugar solution.
The advantages of this resin are exceptional physical and chemical stability leading to long life, high operating capacity and low rinse requirements. It is suited for use in a wide range of pH and elevated temperature conditions.
TYPICAL CHARACTERISTICS： Tulsion A-722 MP
Type : Macroporous Strong base anion exchange resin
Matrix structure : Polystyrene copolymer
Functional group : Quaternary Ammonium Type I
Physical form : Moist Powder form
Ionic form : Chloride
Screen size US mesh : 16 to40
Particle size (minm. 95%) : 0.4 to 1.2mm
Effective size (mm) : 0.6 to 0.8
Uniform Coefficient : 1.6 max
Backwash settled density : 43 to 45 lbs/ft3 (670 to 720 g/l)
Moisture contents (approx) : 60 ± 3 %
Thermal stability : 80 °C
pH range : 0 to 14
Solubility : Insoluble in all common solvents
Total exchange capacity : 1.0 meq/gm（min）
TYPICAL OPERATING CONDITIONS： Tulsion A-722 MP
Operating Temperature : 70-80° C
Service flow rate : 8-10 BV/hr
Typical Operating Service flow rates : 2-5 BV/hr
Regenerant used : Alkaline brine
Regeneration Concentration : 10% NaCl + 2 % NaOH
Regeneration level : 200+20 g/l
Regenerant flow rate : 1- 2.5 BV/hr
Regeneration and rinse temperature : 50-55° C
Rinse flow rate : Slow : At regeneration flow rate
Fast At service flow rate
Sweetening on volume : 1.5 to 2 BV (approx)
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
