丹富斯動態平衡電動二通閥；流量平衡器與電動控制閥一體，關斷力6.8Bar寬壓差范圍內盤管水流量精度自動恒定模數化流量工廠標定，無需現場平衡調試,電動執行器低噪運轉，安裝及拆卸十分方便電動執行器僅在動作時間15秒內耗電4VA，動態平衡電動二通閥工作原理在全開或全關位置時機械鎖定真正零耗電一體化動態平衡電動二通閥明顯降低水系統流動噪聲，*解決水力平衡問題，綜合節能效果6%-35%。動態平衡電動二通閥工作原理

丹富斯動態平衡電動二通閥技術參數

動態平衡電動二通閥主要技術參數
驅動電源：AC230V±10％，50／60Hz    
功率消耗：6VA  (僅當閥門啟、閉時)    
電機類別：同步電機  

動作時間：1 5s    
引線長度：50cm  

公稱壓力：1.6Mpa  

關閉壓差：<0.6Mpa(二通) 、0.3Mpa(三通) 

連接方式：管螺紋G  

適用介質：冷、熱水或50％乙二醇溶液

介質溫度：2～90℃

Dan fuss dynamic balance electric two-way valve; Flow balance device and electric control valve body, shut off the power 6.8 Bar wide scope of pressure difference inside dish tube automatic constant water flow precision factory calibration, modular flow field balancing without debugging, running low noise electric actuators, installation and removal is very convenient electric actuators only 15 seconds in the action time consumed electricity 4 va, mechanical lock when fully open or close position real zero dynamic balance of electric power integration significantly lower two-way valve flow water system noise, compley solve the problem of hydraulic balance, comprehensive energy saving 6% 35%.

Dynamic balance of electric two-way valve technology parameters

Working power supply

AC 220 v / 50 hz (60 hz)

The transient power

4 the va

Nominal pressure

PN1.6 MPa

Shut down the differential

0.68 MPa

The action time

About 15 s

Working pressure difference

10 ~ 100 kpa or 20 to 200 kpa

Flow deviation

5%

Choose materials

Stainless steel valve core, stainless steel spring, nickel plated copper body surface

Flow module (m3 / h)

0.32 0.40 0.50 0.65 0.80 1.00 1.25

Medium temperature

2 ~ 90 ℃ water

Control signal

Three floating point or two point three line

The connection method

Threaded, 3/4 ", 1 "silk mouth

Connection size

Dynamic balance of electric two-way valve main technical parameters

Drive power supply: AC230V plus or minus 10%, 50/60 hz

Power consumption: 6 va (only when the valve opening and closing)

Motor categories: synchronous motor

5 s action time: 1

Lead length: 50 cm

Nominal pressure: 1.6 Mpa

Closed differential pressure: < 0.6 Mpa (two-way), 0.3 Mpa (tee)

Connection mode: pipe thread G

Applicable medium: cold, hot water or 50% ethylene glycol solution

Medium temperature: 2 ~ 90 ℃