丹富斯平衡閥是一種具有特殊功能的調節型閥門，具有良好的流量特性，能夠合理地分配流量，實現流量定量，可以有效地解決供熱（空調）系統中存在的室溫冷熱不均問題。由于該閥門設有開啟度指示、開度鎖定裝置及用于流量測定的測壓小閥，所以只要在各支路及用戶入口裝上適當規格的平衡閥，并用智能儀表進行一次性調試后鎖定，將系統的總水量控制在合理的范圍內，從而克服了“大流量，小溫差”的不合理現象。該產品是供熱系統中的理想產品。中國丹佛斯平衡閥既可安裝在供水管上，也可以安裝在回水管上，一般我們建議安裝在回水管上，尤其對于高溫環路，為方便調試，更要裝在回水管上，安裝了平衡閥的供（回）水管不必再設截止閥。

丹富斯平衡閥技術參數

公稱壓力：1.6MPa

公稱通徑：15～600mm

適用介質：水、油等非腐蝕性液體

適用溫度：0～100℃

法蘭標準：GB/T 17241.6GB/T 9113

試驗標準：GB/T 13927API598

Dan fuss balancing valve is a kind of external regulation valve with special functions, has good flow characteristic, to reasonably allocate flow, implementation flow quantitatively, can effectively solve the heating (air conditioning) room temperature is uneven and problems that exist in the system. Because the valve is equipped with locking device and the open degree of instructions and the opening used for flow measurement of pressure valve, so as long as in the selection and the user entry fitted with appropriate specifications of the balance valve, with special inligent instrument for the disposable lock after debugging, the system of the total water control in a reasonable scope, thus overcome the "big flow rate, small temperature difference" unreasonable phenomenon. This product is the ideal product in the heating system. Danfoss China balancing valve can be installed on the water supply pipe, also can be installed on the return pipe, generally we recommend installed on the return pipe, especially for high temperature loop, in order to facilitate debugging, more on the return pipe is loaded, installed the balancing valve for (back) to the pipe don't have to set a cut-off valve.

Dan fuss balancing valve technology parameters

Nominal pressure: 1.6 MPa

Nominal size: 15 ~ 600 mm

Applicable medium: water, oil and other corrosive liquids

Applicable temperature: 0 ~ 100 ℃

The flange standard: GB/T 17241.6 GB/T 9113

Test standard: GB/T 13927 api598