污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
行業產品
深圳市創鑫儀器有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地
聯系方式:吳先生查看聯系方式
更新時間:2024-09-16 08:14:35瀏覽次數:79次
聯系我時,請告知來自 環保在線F22.50德國PTL萬用型彈簧沖擊錘F22.50德國PTL萬用型彈簧沖擊錘符合標準IEC60068-2-75/1997-08等,用于電子電工產品的抗撞機能力的測試,是檢測電器產品外殼在承受機械外力情況下安全性能必需的試驗器具。
F22.50德國PTL萬用型彈簧沖擊錘
產地:德國
產品型號: F22.50
F22.50德國PTL萬用型彈簧沖擊錘符合標準IEC60068-2-75/1997-08等,用于電子電工產品的抗撞機能力的測試,是檢測電器產品外殼在承受機械外力情況下安全性能必需的試驗器具。F22.50德國PTL萬用型彈簧沖擊錘適用于家用和類似用途電器、電子產品、燈具、電器附件的外殼、操作桿、手柄、旋鈕、指示燈、信號燈及燈罩等進行機械強度試驗,以保證被試產品能夠承受可能發生的魯莽操作和其它意外,電器產品能夠安全可靠的運行,不會對人生傷害.
F22.50德國PTL萬用型彈簧沖擊錘技術參數:
型號 沖擊能量 公差
F22.10 0.14J +/-0.014J
F22.11 0.20J +/-0.02J
F22.15 0.35J +/-0.03J
F22.16 0.50J +/-0.04J
F22.17 0.70J +/-0.05J
F22.18 1.00J +/-0.05J
F22.20為單檔,沖擊能量為:2.00J
F22.50有五個適當?shù)臎_擊能量0.20J,0.35J,0.50J,0.70J和1.00J
長 度: 211mm
重 量: 1250g
外 徑: 50 mm
錘頭重量: 60g
錘頭半徑: 10mm
沖擊組件: 包括擊發球柄與錘頭,重量為250g,錘頭由白色聚先亞胺制成
沖擊釋放力:小于10N
PTL Spring-operated Impact-Test Apparatus F 22.50
for impact tests to demonstrate the level of robustness according to IEC, EN, VDE in accordance with e. g.: IEC 60068-2-75/ 1997-08 §5 and An. E
Standard Outfit:
1 body, including release mechanism and striking element guide, mass 1250 g, outside diameter 50 mm,
1 striking element, with cocking knob and with hammer head, face of polyamide, spherical segment shape with a radius of 10 mm, mass 250 g, length approx. 315 mm,
1 release cone, mass 60 g,
1 helical compression spring, mass approx. 9 g,
total length cocked approx. 350 mm, total mass approx. 1570 g,
supplied ready for operation, including PTL certificate concerning calibration of impact energy by means of a calibration device according to IEC 60068-2-75 / 1997-08 Annex B and concerning release pressure,
Impact energy Tolerance Article No.:
0,14 J ± 0,014 J F 22.10
0,20 J ± 0,02 J F 22.11
0,35 J ± 0,03 J F 22.15
0,50 J ± 0,04 J F 22.16
0,70 J ± 0,05 J F 22.17
1,00 J ± 0,05 J F 22.18
PTL Universal Spring Hammer
as described above, but with the five impact energies 0,20 J, 0,35 J, 0,50 J, 0,70 J and 1,00 J, to be selected by means of a disk with knurled edge, tolerances as scheduled above, supplied with PTL calibration certificate concerning the five impact energies and the release pressure, Article No.: F 22.50
PTL spring-operated impact-test apparatuses with other impact energies, e. g. 2 J (F 22.20), other masses of the striking element, e. g. 500 g (F 22.20), other release forces, e. g. 20 N, and other hammer heads, e. g. made of steel with r = 25 mm (F 22.20):on special request
Preserving Case,
made of wood, to keep one spring-operated impact-test apparatus, with floccular coated holders
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商鋪:http://www.kindlingtouch.com/st30200/
主營產品:灼熱絲試驗儀、漏電起痕試驗儀、針焰試驗儀、水平垂直燃燒試驗儀、單根電線電纜垂直燃燒試驗儀,標準試驗直指、彈簧沖擊器、球壓試驗儀
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
深圳市創鑫儀器有限公司