污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
寧波海曙聯欣電子科技有限公司
寧波海曙聯欣電子科技有限公司
FT-105C ASTM D1895塑料表觀密度儀
FT-105CASTM D1895塑料表觀密度儀
FT-105CASTM D1895Plastic apparent density meter
一.參照標準standard：
ASTM D1895 03 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of PlasticMaterials 1； Apparatus for Apparent Density Test, Method A和B制作。
According to ASTM d1803 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials 1;Apparatus for Apparent Density Test, Method A and B.
二.參數資料Technical Parameters
選購一：A型漏斗要求: Optional 1: A type funnel requirements
參數要求：儀器尺寸符合ASTM D-1895標準中A方法，漏斗上出口直徑9.3cm、下出口直徑0.95±0.08cm，漏斗高度11.4cm，漏斗材質要為不銹鋼316；量杯高度7.98cm、直徑3.99cm；量杯口與漏斗下出口的高度為3.8cm；配置附件： 秒表1只;毛刷1只; 鋼尺15cm 1把 說明書；保修卡；合格證。
Parameter requirements: instrument size conforms to the D-1895 standard in ASTM A method, the upper opening diameter of the funnel is 9.3cm, the lower outlet diameter of the funnel is 0.95±0.08cm, funnel height is 3.99cm, the height between the cup mouth and the lower outlet of the funnel is 3.8cm. Accessories: stopwatch 1, brush 1, steel rule 15cm 1, manual, warranty card, certificate.
選購二：B型漏斗要求Optional 2: B type funnel requirements
1、量杯的高度24±0.1cm；The height of cup is 24±0.1cm.
2、漏斗與量杯的高度3.8cm；The height between funnel and cup is 3.8cm.
3、漏斗下出口2.54cm±0.16cm；The lower outlet of the funnel is2.54cm±0.16cm.
4、漏斗上開口12.7±1.0cm；The upper opening diameter of the funnel is 12.7±1.0cm.
5、量杯的容積400ml±2.0ml；Cup volume is 400ml±2.0ml.
6、角度：24度；Angle: 24 degrees.
7、材質：不銹鋼材質；Material: stainless steel;
8、配置附件： 秒表1只;毛刷1只; 鋼尺15cm 1把 說明書；保修卡；合格證。
Accessories: stopwatch 1, brush 1, steel rule 15cm 1, manual, warranty card, certificate.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
