污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
東莞市宏圖儀器有限公司
東莞市宏圖儀器有限公司
暫無信息 |
BasicInfo
Standard:According to IEC61215, IEC61646 standard requirement
Purpose:to precondition the module with ultra-violet (UV) radiation before the thermal cycle/humidity freeze tests to identify those materials and adhesive bonds that are susceptible to UV degradation
Technical specifications:
1,Use material:can completely obstruct ultraviolet rays,tightness,good thermal insulation's high quality materials
2,Machine UV total irradiation area:more than 2000mm×2000mm,meanwhile satisfy 2 pcs module (2m×1m)
3,Light source life :system use Xenon lamp single lamp life is 1000 hours , delivery offer one set of spare part, use the life at above 2000 hours
4,Single lamp UVA and UVA relative energy rate:UVB approx occupy total energy 3%~10%
5,Irradiation strength:wavelength 280nm~385nm's irradiation strength can reach about 100W/m2,promise the test cycle reduce as far as possible
6,Irradiance uniformity:be better than ±15%
7,Real-time monitor and show UVA and UVB strength
8,UVA (320nm~385nm), UVB(280~320nm) Each one of the fiber optic probes
9,Module surface temperature:60oC±5oC
10,Temperature resolution:0.1oC
11,Ozone: almost no ozone is produced
12,Light ways :upper light, module test plane vertical light source
13,Touch screen operate and real-time monitor , when reached the set value will automatic cut off the light source
14,Real-time figure show module surface temperature, measurement accurate±0.1oC
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
