Purpose It's use to verification and ensure component under the different install angle suffer wind, snow or cover ice etc static , dynamic load ability, width use to check pv module resistance press strength test , adpot dynmatic holding press technical , simulate load test , in order to products under the load statue resistance press ability
standard It's according to IEC61215,IEC61646 etc standard
Specifications 1.Machine table exterior size:L 320 × D 180 × H 195 cm 2.Test positive load the max 5400 Pa,negative load the max 24 00 Pa 3.Aluminum extrusion structure , platform and support under the test suffer the force statue not deformation ( aluminum surface with the paint dealing , ensure its not discolor) 4.Customization test platform clamp , can according to the pending specimen install method to do the adjust 5.The max test size 120 × 240cm 6.Calibrator:350 kg 7.DC constant voltage and current power :0~100Vor 0~15A adjustable;the resolution 0.001V or 0.001A;the voltage setting accurate more than 0.1V,current setting value accurate more than 0.1A. 8.Cylinder number:4 groups, in total 8 pcs Cylinder outside diameter 80mm Pneumatic cylinder single the max pressure > 6 bar Pneumatic cylinder single group the max put out force > 300 kg Pneumatic cylinder stretch stroke:150 mm 9.sucker number 8 groups , in total 32 PCS Sucker diameter:120 mm Every pneumatic attach a vacuum pressure monitor Between the two suckers mid point spacing can adjust 120mm~ and 400mm
