美國DAKOTA MX-5超聲波測厚儀|手持式超聲波測厚儀

MX-5超聲波測厚儀除了具有MX-3超聲波測厚儀的全部功能外，還新增了下列功能：
報警功能：如果測量值小于你輸入zui小允許值，紅燈亮并有BB的報警聲提示，綠燈亮表示測量在允許范圍內。
差值方式：顯示測量值與預先設定值的差值。
RS232口：輸出數據到打印機或計算機。

MX-5DL超聲波測厚儀除了具有MX-5的全部功能外，還增加了存儲功能，可存儲1000個測量數據。儀器還附帶有通訊電纜和軟件，可將數據傳送到計算機上。

技術參數：
測量范圍：0.63～500mm(鋼，取決于探頭)
顯示精度：0.01mm
探頭頻率：1MHz～10MHz
顯示方式：4位半數字液晶顯示，帶背光
校準：對話式探頭，自動校準
聲速范圍：1250～10000m/s
掃描方式：每秒測量16個點，可以捕捉到zui薄點
電源：2節5號電池。連續使用時間達200小時，當電池供電不足時，顯示器會閃爍報警，直至自動關機
鍵盤：6鍵防水、防油鍵盤
操作溫度：-20℃～50℃
尺寸：63.5x114.3x31.5mm
重量：300g
包裝：ABS工程塑料箱

美國DAKOTA 常用探頭：

The MX-5 is a simple to use hand-held Ultrasonic Thickness Gauge. It offers features that make your job easier. An Alarm mode, Differential mode, high speed scanning, and data send are the main features of the MX-5. The MX-5 comes as a complete kit, ready to use。

MEASURING

Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)

Switch to select English or metric units.

Resolution: 0.001 inch (0.01 millimeter)

Velocity Range: .0492 to .3937 in/m s
1250 to 10,000 meters/sec

Built-in: Stainless steel reference disk for probe zeroing.

Four readings per second for single point measure ments or 16 per second in scan mode  captures the minimum thickness.

Single and Two point calibration option included.

Features: Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.

Alarm Mode: Enter a minimum acceptable thickness value.  If measurement falls below minimum, red led will illuminate and sound beeper.  If measurement is above minimum value, green led will illuminate.

Data Ouput: RS232 output sends thickness readings to a computer  or other external storage device

POWER SOURCE

Two 1.5V alkaline or 1.2V NiCad AA cells.

Typically operates for 200 hours on alkaline and 130 hours on NiCad.

Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.

DISPLAY

Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.

Backlight is selectable: on/off /auto (illuminates only when taking a measurement)

Measurements displayed in inches, inches/microsecond, millimeters and meters/second.

Bar graph indicates stability or reading.

CERTIFICATION

Factory calibration traceable to national standards.

WARRANTY

5 year limited.

PHYSICAL

Weight: 10 ounces

Size: 2.5 W x 4.75 H x 1.25 D inches
63.5 W x 120.7 H x 31.8 D mm

Operating Temperature: -20 to 120F (-20 to 50C)

Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

KEYPAD

Sealed membrane that is resistant to both water and petroleum products.

Nine tactile-feedback keys.

TRANSDUCER

Dual element (transmit and receive)

1 to 10 MHz frequency range.

Locking quick disconnect LEMO connectors

4 foot cable

Optional cable lengths up to 100 feet.

Custom transducers available for special applications