產品展示

美國NORTH STAR美國NORTH STAR PVM VD系列

點擊瀏覽大圖收藏此產品

公司名稱：
更新時間：
所在地：
生產地址：
瀏覽次數：

上海鉑鱗貿易有限公司
2017-10-27 17:34:30
鄂州市
美國
566

【簡單介紹】

美國NORTH STAR PVM VD系列

【詳細說明】

High Voltage Probes

上海鉑鱗貿易有限公司
：王昊強
：

：whq@berling.com.cn

美國NORTH STAR高壓探頭,PVM系列,VD系列

High voltage measurements have a variet

y of different requirements, and our PVM series and VD series probes are designed for most of these requirements. The PVM probes are designed for wide bandwidth and ease of portability where a variety of measurements must be made. The VD series probes are designed for use at higher voltage ranges, and where physical stability is required.

Specialty Probes PVM series probes with PVM-5 on top and PVM-10 on the bottom

The design of the probes is unique. The probe comes fully adjusted without any requirement to further adjust the probe in the field. Stray capacitances internal to the probe are factory calibrated. Stray capacitances due to proximity effects are minimized by the unique conductor placement.

Low temperature and voltage coefficient resistors and capacitors are used throughout the probe to provide maximum measurement accuracy. The probe has a rugged nylon housing, and it is filled with dielectric oil for maximum high voltage stability.

Our PVM Series probes our available with either 1000:1 or 2000:1 calibration factors at the time of order.

Voltage Probe Specifications

PVM Series Portable High Voltage Probes to 60 kV DC

PVM series high voltage probes are designed for general use, and for exceptional high frequency response. The probes have applications ranging from automotive ignition to excimer laser system measurement to EMI measurement. They are factory calibrated, and they do not require adjustment. In general the probes are for use with 1 Megohm oscilloscopes, but we also offer an optional switch which can compensate for various measurement instruments such as 10 Megohm meters as well. These units are intended for a wide range of applications where portability and ease of use are essential.

Model Number	PVM-1	PVM-2	PVM-3	PVM-4	PVM-5	PVM-6	PVM-11 (PVM-10)	PVM-12
Max DC/Pulsed V (kV)	40/60	40/60	40/60	40/60	60/100	60/100	10/12	25/30
Max Frequency (Mhz.)	80	80	40	110	80	80	50	80
Cable Impedance (ohms)	50	50	50	93	50	50	50	50
DC - 2 Hz.accuracy	<0.1%	<0.1%	<0.1%	<0.1%	<0.1%	<0.1%	<0.1%	<0.1%
2 Hz. - 200 Hz. accuracy	<1 %	<1. %	<2. %	<1. %	<1 %	<1 %	<1.5 %	<1.5 %
200 Hz. - 5 Mhz. accuracy	<1.5%	<1.5%	<3%	<1.5%	<1.5%	<1.5%	<2.%	<2.%
> 5 Mhz. Accuracy	<3%	<3%	<4%	<5%	<3%	<4%	<4%	<4%
Input R/C (Megohm/pf)	400/13	400/13	400/10	400/10	400/12	400/12	100(50)/15	300/7
Cable Length (ft./m)	15/4.5	30/9	100/30	15/4.5	15/4.5	30/9	15/4.5	15/4.5
Standard Divider Ratio	1000:1	1000:1	10,000:1	1000:1	1000:1	1000:1	1000:1 (100:1)	1000:1
Length (inches/cm.)	19/47	19/47	19/47	19/47	19/47	19/47	7/18	9/23

Add -2 to any PVM-1 - PVM-6 or PVM-12 part number for 2000:1 ratio

VD Series High Voltage Probes 60 to 300 kV DC

Specialty Probes

VD series high voltage probes are floor standing high voltage probes which are designed for rugged day in - day out use. They are used in a wide range of applications ranging from evision tube manufacturing to radar to advanced particle accelerator applications. Resistors with an extremely low voltage coefficient of resistance are used, and all capacitors are temperature, frequency, and voltage stabilized for the best possible performance. The probes all have field defining toroids as a standard item in order to minimize the proximity effect (stray capacitance) and maximize the reproducibility of the measurement. The high and low frequency calibrations are carefully matched before shipment. Very high frequency cable effects are also carefully compensated so accurate measurements can be made even when the cable length exceeds the pulse duration. No adjustments are necessary once the probes have been factory calibrated.

Model Number	VD-60	VD-100	VD-150	VD-200	VD-300	VD-400
Max DC/Pulsed V (kV)	60/120	100/180	150/240	200/300	300/420	400/550
Max Frequency (Mhz.)	20	20	20	16	12	8
Cable Length (ft.)	30	30	30	30	30	30
DC accuracy	<0.1%	<0.1%	<0.1%	<0.1%	<0.1%	<0.1%
10 Hz. - 1 Mhz. Accuracy	1 %	1 %	1 %	2 %	2.5 %	3 %
>1 Mhz Accuracy	3 %	3 %	3 %	3 %	4 %	4 %
Resistance (Megohms)	800	1600	2000	2800	4500	7000
Height (inches/cm.)	20/50	24/60	30/75	40/99	54/135	72/180
Diameter (in/cm.)	11/28	11/28	12/29	16/40	24/61	24/61
Capacitance (approx. pf)	27	25	27	24	20	16
Base Diameter(in/cm.)	10/25	10/25	12/30	20/50	30/76*	30/76
Standard Divider Ratio	10,000:1	10,000:1	10,000:1	10,000:1	10,000:1	10,000:1

Voltage Probe Outline Drawings

Pulsed Power Formulary (794 KB)

Bare Probe Manual (345 KB)

PVM 1-4 Outline (32 KB)

PVM 5-6 Outline (31 KB)

PVM-10/11 Outline (22 KB)

PVM-12 Outline (28 KB)

VD-100 Outline (11 KB)

VD-150 Outline (5 KB)

VD-200 Outline (6 KB)

VD-300 Outline (4 KB)

VD-60 Outline (10 KB)


留言框
感興趣的產品：	*
留言內容：
您的姓名：	*
您的單位：
聯系電話：	*
微信：
常用郵箱：
詳細地址：
省份：	*
驗證碼：	* = 請輸入計算結果（填寫阿拉伯數字），如：三加四=7
是否接受其他廠商報價:	* 匹配3家以內供應商匹配5家以內供應商匹配5家以上供應商不接受