數顯式液壓*試驗機
Digital display type hydraulic universal testing machine
主要用途
Main uses
數顯式式液壓*試驗機主要用于金屬材料的拉伸、壓縮、彎曲等力學性能試驗，增加簡單的附件后可對水泥、混凝土、磚、瓦、橡膠及其制品進行檢測。
Digital display type hydraulic universal testing machine is mainly used for metal materials tensile, compression, bending mechanical properties test, adding simple accessories for test on cement, concrete, brick, tile, rubber and its products.
本機由雙立柱雙絲杠油缸下置式主機及琴式油源控制柜組成。拉伸空間位于主機上方，壓縮、彎曲試驗位于主機下方即中橫梁和工作臺之間。試驗空間的調整通過移動中橫梁來實現，中橫梁升降采用鏈條傳動。手動調整送油閥進油量來實現材料的拉伸、壓縮、彎曲等試驗。試驗完成后自動求取材料的zui大力、抗拉強度等試驗結果。
This machine consists of two column dual screw cylinder underneath type host and banjo type oil source control cabinet. Tensile space located above the main machine, compression, bending test is located below the main beam and platform. The space adjustment is achieved by moving beam, crossbeam lifting adopts chain transmission. The tensile, manually adjust the oil supply valve oil inlet amount to achieve the compression, bending test. Results the maximum stress, after completion of the test the automatic calculation of the tensile strength etc..
數顯式液壓*試驗機
Digital display type hydraulic universal testing machine
性能特點:
Performance characteristics:
1、特制超厚鉗口座在鉗口夾持試樣時、使鉗口*包容在鉗口座體內，使試樣夾持更加可靠，杜絕了因鉗口座淺而呈喇叭狀變形損壞的可能，大大提高了設備的使用壽命。
1, special ultra thick jaw in clamp sample, the jaw is compley contained in the jaw seat body, so that the specimen clamping is more reliable, avoided the jaw seat is shallow and forms a horn shape deformation and damage, greatly improving the service life of the equipment.
2、在鉗口座和鉗口卡板之間增加了耐磨襯板，杜絕金屬拉伸過程中氧化皮掉入，致使鉗口座斜面劃傷的現象，使夾持過程更順滑，加成更牢靠。
2, the increase in the opening between the seat and the jaw clamping the wear-resisting lining board, prevent oxidation of metal drawing process into the jaw seat, cant scratch phenomenon, the clamping process more smooth, plus more reliable.
3、測控系統運行速度快、界面溫和、具有多種試樣信息輸入模式，可滿足不同材料的測試。對于相同條件的試樣一次輸入多個自動生成。
3, speed measurement and control system of the fast, mild, with a variety of sample information interface input mode, which can meet the different material test. Under the same conditions for a multiple input automatic generation.
4、試驗力顯示全程分辨率不變，以確保實驗數據測量的準確性。
4, the test force display full resolution, to ensure the accuracy of experimental data measuring.
5、試驗數據（試驗力、加載速率）和試驗曲線隨試驗過程動態實時屏幕顯示。
5, the test data (test load, loading rate) and test curves with the experimental process dynamic real-time screen display.
6、實驗結束后實驗數據自動分析、自動存儲和打印。
6, the end of the experiment the experimental data analysis, stored and printed automatically.
7、當負荷超過慢量程的2%-*是自動過載保護停機。
7, when the load exceeds the slow scale 2%-* is automatic overload protection shutdown.
8、分解試驗日期可自動查詢相關歷史記錄。
8, the decomposition test date can automatically query the relevant historical records.
9、軟件預留數據接口，方便于試驗室間隔局域聯網，便于試驗數據管理。
9, the software for data interface, easy to test ventricular septal local area networking, convenient test data management.
數顯式液壓*試驗機
Digital display type hydraulic universal testing machine
技術參數：
Technical parameters:
產品型號 WE-100B WE-300B WE-600B WE-1000B
The product model WE-100B WE-300B WE-600B WE-1000B
主機結構形式 雙立柱雙絲杠油缸下置式結構
Structure of the double column host of structural forms of double screw cylinder
zui大試驗力 100 kN 300 kN 600 kN 1000 kN
Maximum test force of 100 kN 300 kN 600 kN 1000 kN
試驗機級別 1級
Testing machine level 1
試驗力測量范圍 2%-*
The test force measurement range 2%-*
試驗力示值
The test force value
相對誤差 ≦示值的±1%
The relative error is less than or equal to the value of + 1%
活塞zui大移動速率 70（mm/min）
The piston moving rate 70 (mm/min)
橫梁調整速度 120（mm/min）
The beam adjusting speed of 120 (mm/min)
活塞zui大行程 250mm
The piston stroke 250mm
控制方式 手動加載
Control manual loading
有效拉伸空間 650mm
The effective tensile space 650mm
有效壓縮空間 550mm
The effective compression space 550mm
立柱間距 540mm 540mm 540 650mm
The column spacing of 540mm 540mm 540 650mm
夾緊方式 手動夾緊(可選配液壓夾緊)
The clamping way manual clamping (optional hydraulic clamping)
圓試樣夾持直徑 φ6-φ26mm φ6-φ26mm φ13-φ40mm φ13-φ40mm
Round specimen clamping diameter φ 6- φ 26mm φ 6- φ 26mm φ 13- φ 40mm φ 13-
扁試樣夾持厚度 0-15mm 0-15mm 0-15mm 0-30mm
Thickness of flat plate specimen 0-15mm 0-15mm 0-15mm 0-30mm
扁試樣夾持寬度 70mm 70mm 75mm 75mm
Flat specimen clamping width of 70mm 70mm 75mm 75mm
上下壓盤尺寸 φ160/204*204mm（選配）
Upper and lower pressure plate size φ 160/204*204mm (optional
彎曲支輥間距 600 mm
The bending roller spacing of 600 mm
彎曲支輥寬度 140mm
The bending roll width 140mm
安全保護裝置 機械限位保護和軟件過載保護
Mechanical safety protection device limit protection and overload protection
主機外形尺寸（mm） 810×560×2050 810×560×2050 830×580×2150 1060×660×2450
Overall dimensions (mm) of 810 * 560 * 2050810 * 560 * 2050830 * 580 * 21501060 * 660 * 2450
主機電源 0.55KW 0.55KW 0.55KW 0.75KW
The host power supply 0.55KW 0.55KW 0.55KW 0.75KW
油源控制柜外形尺寸（mm） 580×5500×1280 580×5500×1280 580×5500×1280 580×5500×1280
Oil source control cabinet size (mm) of 580 * 5500 * 1280580 * 5500 * 1280580 * 5500 * 1280580 * 5500 * 1280
控制柜電源 1.5 KW 1.5 1.5 1.5
The power control cabinet of KW 1.5 1.5 1.5 1.5
主機機重量 1500kg 1800kg 2100kg 2800kg
The host machine weight 1500kg 1800kg 2100Kg 2800kg
關于更多 數顯式液壓*試驗機 詳細資料請您
For more on digital display type hydraulic universal testing machine details, please call the Advisory
