進口高壓對焊球閥
德國泰科閥門（）有限公司—廣州總代理
德國泰科高壓對焊球閥簡介:
進口高壓對焊球閥，驅動方式可選用手動、蝸輪、氣動、電動，連接方式可選用法蘭、焊接，結構形式可選用直通式，密封結構可選用軟密封、硬密封，壓力范圍PN1.0-32.0Mpa，公稱通徑為DN10-200mm，材質可選用鍛鋼、鍛不銹鋼。由于閥門的使用范圍非常的廣泛，同一種閥門在不同的場合與工況有不同的搭配，如果您是非專業人士，歡迎您向本公司。本公司有專業技術人員為您服務！
進口對高壓球閥特點:
1、本產品所有部件均為鍛件。
2、采用下裝式閥桿，設置倒密封結構，確保填料處可靠密封及防止閥桿脫出。
3、采用鑲嵌式閥座。閥座背后設O型圈，確保介質不外漏。
主要零件材料：
零件名稱 材質
GB ASTM
閥體、閥蓋 WCB A216-WCB
密封圈 尼龍 尼龍
球體 1Cr18Ni9Ti SS 304
閥座、閥桿 2Cr13 A246-416
O形圈 橡膠 橡膠
雙頭螺栓 35CrMoA A193-B7
主要性能規范：
公稱壓力PN:16 32 MPa
強度試驗壓力PT:24 48 MPa
低壓密封試驗力:0.6 MPa
高壓密封試驗力:17.6 35.2 MPa
適用介質 水、油品、蒸汽
適用溫度:-40～880℃
German TEK Valves (International) Co., Ltd. - Guangzhou distributor
Introduction
Imported high-pressure welded ball valve, drive mode can be selected manually, worm gear, pneumatic, electric, optional flange connection, welding, structural forms can be used straight-through, sealing structure can be used soft seal, seal,
pressure range PN1.0-32.0Mpa,
nominal diameter of DN10-200mm, the material can be forged, forged stainless steel. Because use of the valve range is very wide, with a valve on different occasions and with different operating conditions, if you are a non-professional, you are welcome to our company to inquire. The company has professional technical staff at your service!
Imports on High Pressure Ball Valve Features
1, all components of this product are forgings.
2, using download type stem, set back seal structure to ensure a reliable seal and packing at the stem to prevent prolapse.
3, using mosaic seat. O-rings located behind the seat, make sure the media does not leak.
Imported high-pressure welded ball valve main parts:
Part name Material
GB ASTM
Body, bonnet WCB A216-WCB
Seal Nylon Nylon
Sphere 1Cr18Ni9Ti SS 304
Seat, stem 2Cr13 A246-416
Rubber O-ring rubber
Stud 35CrMoA A193-B7
Imported high-pressure welded ball valve main performance specifications:
Nominal pressure PN 16 32 MPa
Strength test pressure PT 24 48 MPa
0.6 MPa pressure seal test force
High pressure seal test force 17.6 35.2 MPa
For medium water, oil, steam
Suitable temperature -40 ~ 880 ℃
德國泰科閥門有限公司
GERMANY TEK VALVES CO.,LTD
Contact：黃子軒
1392-2732813
MB：
:
：tek888
Address：廣州市、天河區、車陂東路
