炭陽極用煅后石油焦粉末電阻率測試儀
產品名稱：炭陽極用煅后石油焦粉末電阻率測試儀
產品型號：GEST-124
滿足標準：YS T 587.6-2006 炭陽極用煅后石油焦檢測方法 第6部分：粉末電阻率的測定.pdf
主要技術指標：
一 測量范圍： 電阻 10-5----106Ω，分辨率 10-7
二 測量誤差： 10-4---106Ω， 0.15%
10-5 Ω, 0.25%
三 系統配置：
測試主機：
1 數字電壓表：量程： 2mV ,20mV, 200mV ,2V
分辨率： 0.1uV，1uV，10uV，100uV
量程誤差： 2mV 檔: 0.1%讀數+ 6個字
20mV, 200mV, 2V檔： 0.1%讀數+ 2字
2 直流恒流源： 輸出： 100uA,1mA,10mA,100mA,1A
誤差： 100uA,1mA,10mA,100mA： 0.1%
1A， 0.15%
3 多窗口顯示界面：實測電壓；電阻率；機箱內溫度；正向電壓值；負向電壓值；電阻率
（系統根據輸入值和測試值自動運算）。
4 測試夾具符合:YS/T 587.6-2006
粉末量杯的基本尺寸：
1、有 10mm,6mm內經兩種
2、電壓端子間距 固定 10mm
3、電流下端子距離下部電壓端子 10mm, 電流上端子是活動施壓的部分，距離上部電壓端子距離 10mm<S< 21.5 ,即粉杯zui大裝粉量為 ：
6mm粉杯： 607.59毫升（-141.3毫升，即建議至少留5mm的空間容納電流電極）
10mm 粉杯：1687.75毫升（-392.5毫升，即建議至少留5mm的空間容納電流電極）
4、粉杯總高度： 86mm< H<107.5
5、粉末施壓 10mm粉杯 ： P <3.5MPa
6mm 粉杯 ： P<10.4MPa
注：以上為現有設計粉杯的基本參數，可以按用戶要求定制整套測試夾具
Carbon anodes calcined petroleum coke powder resistivity tester
Product name: carbon anode with calcined petroleum coke powder resistivity tester
Product Type : GEST-124
To meet the standard : YS T 587.6-2006 carbon anode Calcined petroleum coke test methods - Part 6 : Determination of resistivity powder . Pdf
The main technical indicators:
A measuring range: Resistance 10-5 ---- 106Ω, resolution 10-7
Two measurement error : 10-4 --- 106Ω, 0.15%
10-5 Ω, 0.25%
Three system configurations :
Test host :
A digital voltmeter : Range : 2mV, 20mV, 200mV, 2V
Resolution : 0.1uV, 1uV, 10uV, 100uV
Range error : 2mV file : 0.1% of reading + 6 words
20mV, 200mV, 2V file: 0.1% of reading + 2 characters
2 DC current source : Output : 100uA, 1mA, 10mA, 100mA, 1A
Error : 100uA, 1mA, 10mA, 100mA: 0.1%
1A, 0.15%
More than three windows display interface : measured voltage ; resistivity ; temperature inside the chassis ; Forward voltage value ; negative voltage value ; resistivity
( The system according to the input value and the test value automatic operation ) .
4 test fixture meet : YS / T 587.6-2006
Basic dimensions of the powder measuring cup :
1, there is 10mm, 6mm Neijing two kinds
2, the voltage terminal spacing fixed 10mm
3, the current from the lower terminal voltage terminal 10mm, the current pressure on the part of the terminal is active , the distance from the upper voltage terminals 10mm <S <21.5, ie powder Cup largest amount of powder is:
6mm pink cup: 607.59 ml ( -141.3 ml , which suggested leaving at least 5mm of space to accommodate current electrode )
10mm Pink Cup: 1687.75 ml ( -392.5 ml , which suggested leaving at least 5mm of space to accommodate current electrode )
4 cups flour total height : 86mm <H <107.5
Five , pressuring 10mm pink powder cup : P <3.5MPa
6mm pink cup : P <10.4MPa
Note : The above is an existing design pink cup basic parameters , can be customized according to user requirements entire test fixture
