本機采用普通懸掛輸送機，特點如下：拋丸機
（1）鉤等間距設置，連續均速前進，連續作業，生產效率高，但對每鉤工件的清理力度不能調節，只能在動態下裝卸料。
（2）拋丸機件出入口采用氣動大門，室體密封性好。
（3）鏈的長度和布置可按用戶要求設定，裝卸鑄件作業點布置靈活，易與上下工序組成流水作業。
（4）通懸掛輸送機比積放式簡單，造價低，維修量小。
本類設備適用于大批量生產中清理中小鑄件，目前在汽車、拖拉機、柴油機及閥門等行業中應用廣泛。拋丸機
| 序號 | 產品名稱 /項目 | Q483 | Q485 | Q4810 |
| 1 | 生產率（鉤/h） | 8-10 | 8-10 | 8-10 |
| 2 | 吊鏈運行速度（m/min） | 2.44 | 7.34 | 2.44 |
| 3 | 工件zui大重量（Kg） | 300 | 500 | 800 |
| 4 | 吊鏈吊距（mm） | 2560 | 2560 | 2560 |
| 5 | 拋丸量（Kg/min） | 250*2 | 250*3 | 360*6 |
| 6 | 除塵風量（m/3h） | 6000 | 10000 | 25000 |
The suspended chain through type shot blasting machine workpiece in two hang hanger lifting into the shot blasting chamber, when entering the shot blasting area, hanging chain automatically stop, at the same time the door closed, two hanging workpiece in their respective position in the rotation mechanism driven by the rotation of the workpiece, and efficient shot blasting machine, shot blasting, cleared the controller, stop the supply of pills, open the gate, the workpiece in the drive chain conveying system are transported out of the shot blasting chamber, while not cleared two hanging workpiece is transported into the shot blasting chamber, repeat the above process, efficient shot-blast cleaning of workpiece.
