螺桿泵是一種單螺桿式輸運泵、它的主要工作部件是偏心螺旋體的螺桿(稱轉子)和內表面呈雙線螺旋面的螺桿襯套(稱定子)。其工作原理是當電動機帶動泵軸轉動時,螺桿一方面繞本身的軸線旋轉,另一方面它又沿襯套內表面滾動,于是形成泵的密封腔室。螺桿每轉一周,密封腔中的液體向前推進一個螺距。隨著螺桿的連續傳動,液體以螺旋形方式從一個密封腔壓向另一個密封腔,zui后擠出泵體。
螺桿泵是一種新型的輸送液體的機械,具有結構簡單、工作安全可靠、使用維修方便、出液連續均勻、壓力穩定等優點。我單位生產的濃漿泵凡接觸物料的金屬零件均選用優質不銹耐酸鋼制作,軸材料2cr13襯筒采用無毒無味的橡膠、工作溫度可達100℃,可用于輸送食品漿料和粘度10000泊斯卡·秒含有固體顆粒或膠塊的溶液漿,懸浮液的腐蝕性介質。廣泛于食品、冶金、建筑、制藥、化工等工業門。 請注意:所使用的介質不同應采用不同的橡膠。 summary
the stud pump is that one kind of one stud type is lost the stud bush ( calling the stator ) that fortune pump and stud ( calling the rotor ) and interior surface that its major work parts are partiality spirochaetas assume the bifilar helix face . his work principle is when being moving when the electromotor drives the pump axle , and on the one hand the stud winds the axis of itself and revolves , on the other hand its again surface roll along the bush , so forming the close cavity room of pump . the stud is one week per revolution , and liquid in the close cavity pushes on forward a pitch . along with the continuous transmission of stud , the shape method of liquid with the spiral is pressed to another close cavity from a close cavity , and finally crowds out the pump aspect.
the stud pump is the machinery of one kind of new transport liquid , and possesses that the structure is simple and work is safe and reliable and use to keep in repair convenient and goes out the merits such as liquid is continuously even and pressure is stable etc . the dense thick liquid pump of my unit production contacts altogether the metal part that the thing is expected all chooses the high quality not to become rusty the acidproof steel is made , axle material 2cr13 lines and tin uses nonpoisonous tasess rubber and work temperature 100 ℃s attainability , available in the transport foodstuff thick liquids and the viscosity 10000 moors this calorie of contains second solid anything small and roundish or glue piece the solution thick liquid , the corrosiveness medium of suspension liquid . extensively in the ministry of industry such as foodstuff , metallurgy , building , pharmacy and chemical industry etc the doors please paying attention to : the medium difference that the stud pump uses should use the different rubber .
結構簡介
i-1b系列單螺桿濃漿泵由電動機、聯軸器、泵和底座四個部分組成(見附圖)。
配用的動力采用y系列三相異步電動機(六極)。
聯軸器采用水泵用爪型彈性聯軸器。
泵由泵殼、空心軸、萬向絞接頭、繞軸、螺桿、襯套、軸封裝置和出料口等組成,螺桿的斷面為圓形、襯套斷面為橢圓形,其內表面為雙螺旋面。
the structure brief introduction
the dense thick liquid pump of one stud of i-1b s series is formed ( seeing the attached map ) by four parts electromotor , shaft coupling , pump and bases
motive force joining in marriage usefulness uses y s series asynchronous electromotor of three-phase ( six utmost points )
the shaft coupling uses the water pump with the paw mould elasticity shaft coupling
the pump by the pump shell , become hollow inside axle and universal twists joints and winds axle , stud , bush and axle seal and package places and goes out the material mouth etc and forms , and the section of stud is the oval for round and bush section , and his interior surface is the duplexing spirals faces . |
性能參數
