PENETRANT
適合溫度高于-10℃的著色滲透探傷,*使用溫度-10~20℃
Suitable for dye penetrant flaw detection at temperature lower
than -10℃, and most suitable for flaw detection at temperature
between -10℃ and 20℃.
使用說明(PROCESSu INSTRUCTION)
① 用清洗劑清洗工件表面
Clear the workpiece surface with remover
② 用滲透劑噴涂工件表面,保持濕潤10~15分鐘
Spray penetrant on the workpiece and keep wet for 10~15 minutes
③ 擦去工件表面多余的滲透劑,用清洗劑清洗
Wipe out excessive penetrant on the workpiece surface,then wash with remover
④ 噴涂顯像劑,片刻即能顯示缺陷
Spray developer, flaw is visible at once