Brief: This plastic filler is special designed for strong acid products. Main construction and the liquid tank are made of OPP, the wetted parts adopt SUS304 coated Teflon or OPP, the filling nozzles are made of Epoxy resin or OPP, to be anti-corrosion.
Drip gutter system :Anti-liquid leakage, more friendly-environment. The drip gutter retract , the filling nozzles go down to start the filling, after finish filling, the drip gutter extend, the filling nozzles go up.
Vacuum suck system :The PLC output s signal after filled, then the valves of suck back system in the form of negative pressure, under this condition to guarantee some residual liquid on the filling heads not drip to the bottle opening and conveyors, which suck back to the liquid tank for the further used.
Working principle:
1. This filler takes advantages of time gravity filling to achieve the demａnd filling dosage. The PLC controls the filling valves opening time, the product inside the liquid tank fill into the containers automatically. Very simple structure. No bottle no filling.
2. The liquid lever is relative confirmed, thus the required filling dosage can be achieved via control the handle-valves diameter and pneumatic valves’ opening time
Major characteristics:
This inline plastic filling machine specially designed for strong acid and alkali product, such as: hydrochloric acid products,bleach.
(1)Siemens Germany Branded PLC controlled with Siemens Germany Branded friendly touch screen.
(2) Famous brａnd electrical components and Festo Germany Branded air cylinders, and Airtac Branded pneumatic components used to guarantee machines quality and long life service time.
(3)Scientific designed filling nozzles are available to be anti-foam.
(4)Not only all nozzles’s filling volume can be rough adjusted, but each individual nozzle’s filling volume can be fine-adjusted.
(5)Different bottles ,unnessary to changing any formats, easy adjustment; easy parameters set-up, can store up to 6 recipes for easy recall.
(6)Bottle inlet counting,quantative filling,bottle outlet counting ,ａnd serious motions can be done automatically.
(8)Simple structure, easy operation, Low noise ,reliable running, accurate filling.
(9) The control electrical cabinet is designed far from the main machine (As above picture shown).
Technical parameter:
| NO. | Items | Performance |
| 01 | Power Supply | AC 220V ;50Hz or 380V; 50Hz |
| 02 | Power | 1.5Kw |
| 02 | Filling volume | 500ml~2200ml |
| 04 | Productivity | ≤2500bottles/hour |
| 05 | Number of filling nozzles | 12 |
| 06 | Pneumatic (air -operated) source | 0.33-0.50 Mpa clean and Stable compressed air |
| 07 | Material density: | 0.6-1.3 |
| 08 | Machine weight | 650Kg |
| 09 | Dimension | 2000mm×1200mm×2300mm |
Electric parts list:
| Name | Brand | Country |
| Breaker | Omron | Japan |
| Switch power supply | Jietong | China |
| AC contactor | Schneider | France |
| Button | Schneider | France |
| Solenoid valve | Airtac | Taiwan |
| Photo sensor | Optex | Japan |
| Touch screen | Kinco | China |
| PLC | Panasonic | Japan |
| Inverter | Schneider | France |
| Air cylinder | Festo | Germany |
| Oil-water separator | Taiwan | Taiwan |
| Filling valve | FIP | Italy |
| Material inlet valve | FIP | Italy |
