產品型號：JSR0701

產品名稱：發動機燃料實際膠質儀(JSR0701)

產品說明：

JSR0701發動機燃料實際膠質儀

一、符合GB/T509標準

二、主要技術參數

熱浴材料：金屬鋁合金         

加熱方式：電熱板

熱浴導氣管：Φ8×1×4500mm  不銹鋼管

加熱溫度：常溫～280℃  (可調)  

控溫精度：±1℃

控溫方式：進口數顯溫控儀控溫   

工作電源：AC220V±10% 50HZ

三、性能及特點：

1、儀器采用電熱板對金屬鋁合金加熱，升溫快，熱量大，溫度穩定。采用金屬浴代替油浴克服了油浴的各種弊端；

2、儀器可從常溫至280℃范圍內任意一點溫度進自動控制；

3、儀器自動測溫和控溫系統采用電腦數字測控器控制，傳感器反應快，分辨率高，抗干擾強，測控溫精度高；

4、儀器配有分水器，能代替標準中的過濾器將空氣中水分和雜質分離，即使濕度較大地區仍能正常工作。

JSR0701 engine fuel actual gelatometer

I. It conforms to GB/T509 standard

Ii. Main technical parameters

Hot bath material: metal aluminum alloy

Heating mode: electric heating plate

Hot bath airway: Φ 8 * 1 * 4500 mm stainless steel pipe

Heating temperature: normal temperature ~ 280℃ (adjustable)

Temperature control accuracy: ±1℃

Temperature control mode: imported digital display temperature controller

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1. The instrument adopts electric heating plate to heat the metal aluminum alloy, which is characterized by fast heating, large heat and stable temperature. Using metal bath instead of oil bath to overcome the disadvantages of oil bath;

2. The instrument can be automatically controlled from room temperature to 280℃ at any point;

3. The automatic temperature measurement and temperature control system of the instrument is controlled by computer digital measuring and controlling device. The sensor has fast response, high resolution, strong anti-interference and high precision of temperature measurement and control.

4. The instrument is equipped with a water separator, which can replace the filter in the standard to separate the moisture and impurities in the air. It can still work normally even in areas with high humidity.