
產品型號:JSH1701
產品名稱:潤滑脂氧化安定性測定器(JSH1701)
產品說明:
JSH1701潤滑脂氧化安定性測定器
一、符合SH/T0325標準
二、主要技術參數:
熱 浴:水/油浴
攪拌方式:電機攪拌
測壓范圍:0~1.6MPa
壓力顯示:數字壓力顯示
控溫方式:數顯溫控儀控溫
控溫范圍:常溫~110℃
控溫精度:±0.5℃
氧 彈:符合SH/T0325-92標準
功 率:2.0 KW
工作電源:AC220V±10% 50Hz
外形尺寸:560×430×560 mm(長×寬×高)
整機重量:40Kg
三、性能及特點:
1、儀器恒溫浴采用水浴(或油浴)方式,水浴裝有冷凝器裝置,蒸發的水蒸氣通過冷凝器仍流回浴內,使水浴內液體始終保持在水位線上,油浴適合于沸點較低地區使用。
2、儀器恒溫浴采用進口數顯溫控儀自動控溫;控溫精度高,顯示直觀。
3、采用數字顯示壓力,可同時顯示兩個彈體的壓力指示值。
4、采用數顯時間繼電器計時,計時準確,顯示直觀。
5、儀器壓力表和氧彈采用快速接頭連接,接上快速接頭即已導通,拔下快速接頭即予切斷,插入和拔出十分簡捷。
JSH1701 grease oxidation stability tester
I. It conforms to SH/T0325 standard
Ii. Main Technical parameters:
Hot bath: water/oil bath
Stirring mode: motor stirring
Pressure measuring range: 0 ~ 1.6mpa
Pressure display: digital pressure display
Temperature control: Digital display temperature controller
Temperature control range: normal temperature ~ 110℃
Temperature control accuracy: ±0.5℃
Oxygen bomb: SH/T0325-92
Power rate: 2.0 KW
Power supply: AC220V±10% 50Hz
Dimensions: 560×430×560 mm (Length × width × height)
Machine weight: 40Kg
Iii. Performance and Characteristics:
1. The constant temperature bath adopts water bath (or oil bath). The water bath is equipped with a condenser device.
2. The constant temperature bath adopts imported digital display temperature controller to automatically control the temperature; High temperature control precision, intuitive display.
3. Digital pressure display can display the pressure indication value of two projectile bodies at the same time.
4, the use of digital display time relay timing, timing accurate, intuitive display.
5. The instrument pressure gauge and oxygen bomb are connected by a quick connector. The connection of the quick connector is on, and the quick connector is cut off when unplugged, which is very simple to insert and pull out