產品型號：JSH0102B
產品名稱：自動潤滑油氧化安定性測定器JSH0102B
產品說明：
JSH0102B潤滑油氧化安定性測定儀(兩只氧彈)
一、符合SH/T0193-2008、ASTMD2272標準
二、主要技術參數：
控溫范圍：常溫～150℃±0.1℃
測壓范圍：0～1.6Mpa
測試方式：電腦自動檢測壓力和溫度 自動判別壓力降
直觀顯示溫度 壓力曲線
氧彈數量：2只
旋轉速度：100±5r/min
加熱速度：常溫～150℃ ≤2h
工作電源：AC220V±10% 50HZ
三、性能及特點：
1、本儀器采用電腦控制，能自動記錄壓力、溫度及其變化過程，并用曲線描繪出來，能自動打印測試結果；
2、本儀器氧彈上采用日本進口的旋轉接頭，通過壓力傳感器將壓力轉換成電信號直接傳到電腦處理，便于對壓力實時采集和處理，從顯示屏上能觀察到氧彈在充氧后是否泄漏，以及在試驗過程中是否已達到規定的壓力降，數據顯示直觀、方便、精度高；
3、旋轉電動機位于油浴上部，通過傳動裝置使氧彈按100±5r/min速度旋轉，長期使用不會出現漏油的現象；
4、本儀器采用兩個氧彈旋轉座，可同時裝入兩支氧彈，便于做平行試驗；并在旋轉臺底座上裝有葉片，在氧彈旋轉時起到攪拌作用；
5、本儀器在試驗完畢后或在查詢過程中，用戶可根據需要打印出結果。
JSH0102B lubricating oil Oxidation stability tester (two oxygen bombs)
I. Comply with SH/T0193-2008, ASTMD2272 standards
Ii. Main Technical parameters:
Temperature control range: normal temperature ~ 150℃±0.1℃
Pressure measuring range: 0 ~ 1.6mpa
Test method: the computer automatically detects the pressure and temperature and automatically determines the pressure drop
Visually display the temperature and pressure curve
Number of oxygen bombs: 2
Rotation speed: 100±5r/min
Heating speed: normal temperature ~ 150℃ ≤2h
Power supply: AC220V±10% 50HZ
Iii. Performance and Characteristics:
1. The instrument is controlled by computer, which can automatically record the pressure, temperature and change process, and draw out the curve, and automatically print the test result;
2, the instrument used on oxygen bomb rotary joint, imported from Japan by pressure sensor to convert pressure into electrical signals directly to computer processing, facilitate the pressure real-time acquisition and processing, can be observed from the monitor screen of a leaky oxygen bomb after oxygenation, and whether in the process of test has reached the pressure drop, according to intuitive, convenient, high precision;
3. The rotating motor is located on the upper part of the oil bath. The oxygen bomb is rotated at the speed of 100±5r/min by means of the transmission device, so there will be no oil leakage in long-term use.
4. The instrument adopts two oxygen bomb rotating seats, which can be loaded into two oxygen bombs at the same time to facilitate parallel tests; A vane is installed on the base of the rotating table to stir the oxygen bomb when it rotates.
5. Users can print out the results according to their needs after the test or during the inquiry process.
