產品型號：JSR2101
產品名稱：石油產品銅片腐蝕試驗儀JSR2101
產品說明：
JSR2101石油產品銅片腐蝕試驗儀
一、符合GB/T5096、ASTM D130、ISO2160標準
二、主要技術參數：
工作溫度：常溫～130±0.5℃
孔 數：四孔
計時方式：數顯計時器
功 耗：2KW
控溫方式：進口數顯溫控儀自動控制
加熱速度：＜1小時
工作電源：AC220V±10% 50HZ
三、性能及特點：
1、儀器恒溫浴采用水浴或其它液體浴，水浴裝有回流冷凝器裝置，蒸發的水蒸氣通過冷凝器冷凝后回流到恒溫浴內，使水浴內液體始終保持在水位線上；
2、儀器為臺式，采用電加熱管加熱的方式，加熱速度快，使用壽命長；
3、采用數顯溫控儀自動控溫，顯示直觀清晰，可在常溫到100℃內選擇任意一點溫度，控溫準確；
4、采用數顯時間繼電器計時，顯示直觀，操作方便；
5、儀器在工作時可同時插入四支試驗彈，按配備試管的數量多少而定，可同時做多個樣進行對比；
JSR2101 copper sheet corrosion tester for petroleum products
I. Comply with GB/T5096, ASTM D130, ISO2160 standards
Ii. Main Technical parameters:
Working temperature: normal temperature ~ 130±0.5℃
Number of holes: four
Timing: Digital display timer
Power consumption: 2 kw
Temperature control mode: automatic control of imported digital display temperature controller
Heating speed: < 1 hour
Power supply: AC220V±10% 50HZ
Iii. Performance and Characteristics:
1. The constant temperature bath adopts water bath or other liquid bath. The water bath is equipped with a reflux condenser.
2, the instrument is a table, using electric heating tube heating way, heating speed is fast, long service life;
3. Digital display temperature controller is used to automatically control the temperature, and the display is intuitive and clear. Any point of temperature can be selected from room temperature to 100℃, and the temperature control is accurate;
4, the use of digital display time relay timing, display intuitive, easy to operate;
5. The instrument can insert four test bombs at the same time during operation. Depending on the number of test tubes equipped, multiple samples can be made for comparison at the same time;
