JSR0806組合式石油傾點測定器

一、符合GB/T3535標準     

二、技術指標

冷孔尺寸：Φ45×120 mm   8孔

溫度范圍：0~-51℃ （分四段）

制冷方式：壓縮機制冷

測溫方式：數顯溫控儀測控

工作電源：～220V±10％　　50HZ　

消耗功率：750w

三、性能及特點：

1、采用壓縮機復疊式制冷方式，溫度可達-51℃（室溫20℃時）；       

2、儀器可在40℃以下的各種環境中工作，適應性強，噪音低；

3、儀器采用數字溫控儀控測溫，溫度傳感器反應快，分辨率高，控溫精度好；

4、冷室與控制部分通過銅管軟性連接，冷室部分無振感；

5、儀器分4槽，8孔，可以分別控溫。

JSR0806 combined oil pour point tester

I. It conforms to GB/T3535 standard

Ii. Technical indicators

Cold hole size: 8 hole Φ 45 * 120 mm

Temperature range: 0~-51℃ (divided into four sections)

Refrigeration mode: compressor refrigeration

Temperature measurement: digital display temperature controller

Power supply: ~ 220V± 10% 50HZ

Power consumed: 750W

Iii. Performance and Characteristics:

1. The compressor is used for multiple refrigeration, with the temperature up to -51℃ (at room temperature of 20℃);

2. The instrument can work in various environments below 40℃, with strong adaptability and low noise;

3. The instrument adopts digital temperature controller to control and measure temperature. The temperature sensor has fast response, high resolution and good temperature control accuracy.

4. The cold chamber and the control part are soft connected by copper pipe, and the cold chamber part has no vibration sensation;

5. The instrument has 4 slots and 8 holes for temperature control.