FT-105E 高吸收性樹脂密度測定儀 

FT-105E  High absorption resin density tester

適用于聚丙烯鹽酸類高吸收性樹脂及粉塵堆積密度的測定，參照GB/T 22875-2008的規定。

This device is suitable for the determination of high absorptive resin and powder packing density in polypropylene hydrochloric acid, which conforms to the national standard GB/T 22875-2008.The test method is similar to the international related standards requirement

參數資料

不銹鋼漏斗容量大于120ml，且帶有孔氏阻尼或擋板，底口內徑10±0.01mm， 角度40°；

The volume of SS funnel is greater than 120ml, and with hole damping or baffle, the inner diameter of bottom outlet is 10±0.01mm,angle 40°.

漏斗底部距離密度杯頂部40mm±1mm。 

The distance between the bottom of funnel and the top of cup is40mm±1mm.

3.密度杯:不銹鋼材質，容積100±0.5cm3 

Density cup: stainless steel, volume 100±0.5cm3.   

4.漏斗支撐架和底板有定位The funnel bracket and the bottom plate are positioned.

5.配置：水平儀、鋼尺、毛刷、說明書、保修卡、合格證.

Equipment: level, steel ruler, brush, manual, warranty card, certificate.