FT-105表觀密度測定儀

FT-105 apparent density meter

一.適用范圍scope of application：

適用于從規定的漏斗中留出塑料松散物料的表觀密度的測定，用于聚氯乙稀樹脂表觀密度的測定，化工行業以及塑料異型材廠原料進廠質量檢驗

Apply to the determination of the surface density of loose plastic material from the funnel, used for the determination of apparent density of PVC resin, chemical industry and the plastic special-shaped material factory Quality inspection of incoming materials

二.參數資料：Technical Parameters

參照GB/T3402、GB/T1636等標準要求

meet the standard requirements of  GB/T3402, GB/T1636  etc.

選購一：A型漏斗要求 

Optional 1: A type funnel requirements

主要組成部分：底座、支撐架、漏斗、插板、受料筒

Main components: base, support bracket, funnel, insert plate, receiving barrel
受料筒容積：100ml±0.5ml直徑45mm

receiving barrel volume：100ml±0.5ml  diameter 45mm
取樣量：110ml-120ml

sampling amount: 110ml-120ml
漏斗角度為：40度，孔徑為33mm

Funnel angle: 40 degrees, aperture 33mm

可滿足K-6721(1966)之要求

Can meet the requirements of K-6721 (1966)

選購二：B型漏斗要求

Optional 2: B type funnel requirements

參照GB/T3402、GB/T1636 GB/T20022-2005  GB/T13173-2008 和1636-79標準的要求。

Meets the requirements of GB/T3402, GB/T1636 GB/t20022-2005 GB/t13173-2008 and 16363-79

漏斗角度：20度；漏斗上口徑為91mm；出料口內徑：10mm，不銹鋼材質，配有出口控制閥門和擋板；漏斗與量杯高度可以調節，量杯口徑為：45mm；容積：100ml±0.5ml，不銹鋼材質

Funnel angle: 20 degrees. Funnel upper diameter is 91mm. Outlet inner diameter: 10mm, SS, equipped with outlet control valve and baffle. The height of the funnel and the cup can be adjusted, cup diameter: 45mm,volume: 100ml±0.5ml，SS.

取樣量sampling amount：110ml-120ml