環保在線>產品庫>機械零部件>液壓元件>液壓泵|油泵>>圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵

圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱湖南通大自動化供水設備有限公司
品牌
型號
所在地長沙市
廠商性質經銷商
更新時間2025/3/15 11:07:11
訪問次數49

產品標簽:

在線詢價收藏產品點擊查看電話

索取相關資料

公司介紹主營產品

秉承通大集團在供水設備60年的制造經驗，湖南通大自動化供水設備有限公司為客戶提供供水設備服務25年，員工團隊穩定,技能全面。公司創建于一九八六年,占地面積10000 ㎡，目前公司擁有5200㎡的標準廠房。是一家專業研究、設計、制造生產離心泵,消防泵,化工泵,管道泵,循環泵,排污泵,深井泵,空調泵,中開泵,無負壓供水設備,變頻供水設備,水泵控制柜等各種泵類產品的實業企業，生產水泵歷史悠久，已通過了美國BQR認證機構的ISO9001質量體系認證。
　　我廠擁有一支長沙水泵廠的老技術員隊伍，具有*的管理水平，是集生產、科研、銷售于一體的現代化企業。水泵產品均按國家標準測試驗收出廠，具有高效、節能、噪音低、性能穩、振動小、壽命長、溫升幅度大、結構*、使用維修方便等優點。產品銷售網絡遍布全國各地，廣泛應用于石油、煤炭、化工、冶金、合成纖維、印染、造紙、醫藥、供熱、供水、電鍍、食品、水處理、污染控制等行業。
湖南通大水泵廠本著“*、創新、進取”的企業精神，不斷地完善自我，提高自我，積極參與市場競爭，為發展我國的水泵事業而努力奮斗！
　二十四年來，公司曾被授予“全國*集體”稱號及湖南省機械工業連續6年評為“湖南省好企業”；榮獲“湖南省質量管理*企業”稱號等。公司產品先后榮獲“湖南省優質產品獎”、“湖南新產品獎”、“湖南省產品”稱號等。

展開顯示更多內容

離心泵，消防泵

產品簡介在線詢價

產品分類：油泵產品名稱：圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵流量范圍：Q=0.6～50m3/h 揚程范圍：壓力0.6Mpa 輸送溫度：-2......

圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵產品信息

產品概述：

YCB系列圓弧齒輪泵YCB SERIES CIRCULAR ARC GEAR PUMP

用途

■在輸油系統中可作傳輸、增壓泵。

■在燃油系統中可作輸送、加壓、噴射的燃油泵。在一切工業領域中,均可作潤滑油泵用。

■Application:

This pump can be used as a transfer and booster pump in oil delivery systems. It can also be used as a fuel pump for delivery, pressurization, and injection in fuel systems. It can be used as a lubricating oil pump in all industrial fields.

適用范圍

■適用于輸送不含固體顆粒和纖維、無腐蝕性,溫度不高于80℃.粘度為5~1500cSt的潤滑油或性質類似潤滑油的其它液體,本系列另有精鑄不銹鋼材質,適用于腐蝕性介質。

結構特點

■該齒輪采用具有水平的新技術一雙圓弧正弦曲線齒型。它與漸開線齒輪相比,的優點是齒輪嚙合過程中齒廓面沒有相對滑動,所以齒面無磨損、運轉平衡、無困液現象,噪聲低.壽命長、效率高。該泵擺脫了傳統設計的束縛,使得齒輪泵在設計、生產和使用上進入了一個新的領域。

■泵設有差壓式安全閥作為超載保護,安全閥全回流壓力為泵額定排出壓力的1.5倍,也可在允許排出壓力范圍內根據實際需要另行調整。但是此安全閥不能作減壓閥長期工作,需要時可在管路上另行安裝。

■該泵軸端密封設計為兩種形式;一種是機械密封,一種是填料密封,用戶可根據使用要求選擇。

■Application:

This gear pump is suitable for conveying lubricating oil or other liquids with similar properties, with a viscosity of 5~1500cSt, which do not contain solid particles, fibers, or have no corrosiveness. The series also has precision cast stainless steel material, which is suitable for corrosive media. The temperature should not exceed 80℃.

■Structural Characteristics:

This gear adopts a new technology with an international advanced level of a double circular arc sine curve tooth profile. Compared with the involute gear, the most prominent advantage is that there is no relative sliding between the tooth profile surfaces during gear meshing, so the tooth surface has no wear, runs smoothly, and has no trapped liquid phenomenon, low noise, long life, and high efficiency. The pump breaks away from the constraints of traditional design, making gear pumps enter a new field in design, production, and use.

■The pump is equipped with a differential pressure safety valve as overload protection. The full reflux pressure of the safety valve is 1.5 times the rated discharge pressure of the pump and can be adjusted separately within the allowed discharge pressure range according to actual needs. However, this safety valve cannot work as a pressure reducing valve for a long time and can be installed separately on the pipeline when needed.

■The shaft end seal of the pump is designed in two forms: mechanical seal and packing seal. Users can choose according to their requirements.