特點

▲ 采用的新型蜂巢轉輪和環保節能設計，克服了傳統蜂巢成型難，成本高，易磨損，劣化快的缺點；
▲ 出風口加裝冷卻器，確保較低的干燥出風溫度，提升除露效果；
▲ 延長模具的使用壽命，降低腐蝕，減少產品瑕疵及廢品率的比率；
▲ 采用PID溫度控制系統，具有再生溫度設定與實際溫度顯示功能；
▲ 具有超溫、電源逆相、馬達過載等保護功能。

▲ Honeycomb rotor is used to ensure constant air dehumidification effect
▲ Outlet equipped with cooler, the outlet air temperature, dry to ensure low increase in addition to the effect
▲ Inhibits corrosion and prolongs service life of the mould, and yet reduces moulding cycle time
▲ Supplied as standard,a return air collector is used to collect return air from the moulding area back to this machine and to form a closed-loop air circulation, which is particularly practical in tropical climate
▲ Accurate control and display of regenerating temperature using PID Control
▲ Have over-temperature, and the power phase sequence errors, such as motor overload protection function

產品簡介

WHMD系列模具除濕機主要應用在塑料成型中，由于模具使用冷凍水來縮短成型周期而產生的結露問題，特別是PET瓶胚射出適用。本機采用蜂巢轉輪系統進行除濕作業，確保模具周圍始終維持0～10℃的低露點空氣環境，不讓模具產生結露現象也不受季節變化的影響，大幅降低不良率。

The WHMD series mould sweat dehumidifiers are designed for the inhibition of moisture sweat from condensing on the mould surface Forming of moisture sweat on the mould surface is due to the use of chilled water for reducing the moulding cycle time, particularly while moulding of the PET preforms To bring about the moisture sweat on the mould surface is because the mould surface temperature is lower than the dew point temperature of surrounding air, the water vapor comes into being, then causes corrosion of mould and effects quality of moulding parts as well as production efficiencies. This series of machine uses honeycomb rotor to carry out dehumidification function，which generates a dry airflow with dew point ranging from 0～10℃ and ensures the surrounding air of mould remaining in a low dew point temperature It provides constant low dew point surrounding air to the mould surface all year round without being influenced by the change of seasons.