1. The system dynamic range is calculated as the difference between the noise floor and the
specified source maximum output power. The effective dynamic range must take measurement uncertainties and interfering signals into account.
2. May be degraded typically by 10 dB at particular frequencies (multiples of 5 MHz) below 500 MHz due to spurious receiver residuals. Methods are available to regain the full dynamic range.
3. May be limited by crosstalk at certain frequencies below 3 MHz.
4. Value and frequency band changed July 2006.
========================================================================
深圳市邁凱瑞儀器儀表有限公司
*,成色新,測試合格后再付款,歡迎體驗測試,售后服務好
銷售:張敏 : -806
公司:深圳市邁凱瑞儀器儀表有限公司
地址:深圳市龍華新區東環一路天匯大廈D棟6樓D-615室
=======================================================================