加速度傳感器中有一種是三軸加速度傳感器，同樣的它是基于加速度的基本原理去實現工作的，加速度是個空間矢量，一方面，要準確了解物體的運動狀態，必須測得其三個坐標軸上的分量；另一方面，在預先不知道物體運動方向的場合下，只有應用三軸加速度傳感器來檢測加速度信號。由于三軸加速度傳感器也是基于重力原理的，因此用三軸加速度傳感器可以實現雙軸正負90度或雙軸0-360度的傾角，通過校正后期精度要高于雙軸加速度傳感器大于測量角度為60度的情況。三軸加速度傳感器的好處就是在預先不知道物體運動方向的場合下，只有應用三維加速度傳感器來檢測加速度信號。三維加速度傳感器具有體積小和重量輕特點，可以測量空間加速度，能夠全面準確反映物體的運動性質。
美國Dytran的3413A1是一款IEPE三軸加速度傳感器/振動傳感器，壓電式工作原理，靈敏度5mV/g，重13g，自帶4針接頭和TEDS，高密封設計應對潮濕和多塵的工作環境。
The Dytran 3413A1 is a case isolated triaxial IEPE accelerometer with a 5 mV/g sensitivity, vertical height of 0.59-inches (15.0-millimeters), an overall weight of 13 grams, and include Transducer Electronic Data Sheet (TEDS; per IEEE 1451.4) capabilities.
Featuring ceramic shear sensing elements packaged in a titanium housing, design of the model 3413A1 incorporates an industry standard 4-pin radial connector and adhesive mounting capabilities. Units are hermetically sealed for reliable operation in high humidity and dirty environments and case isolated to avoid EMI/ground loop interference.
特性
1. 5 mV/g sensitivity
2. 1,000g range
3. 3.3 to 3,000 Hz frequency range (±5%)
4. 4-pin 1/4-28 radial connector
5. Adhesive mount
6. 13 grams
7. Titanium
8. Hermetic
9. Case isolated
10. Triaxial
11. IEEE 1451.4 TEDS capabilities
12. IEPE
應用
1. Modal and structural analysis
模態與結構分析
2. Noise, Vibration and Harshness (NVH)
噪音，振動與不平順性
3. Product response testing
產品響應試驗
4. Squeak & Rattle
5. General purpose triaxial vibration measurements
一般用途三軸振動測量
Weight 0.5 oz 13 grams
Size Length 0.97 inch 24.6 mm
Width 0.59 inch 15.0 mm
Connector [1] Type 4-pin 4-pin
Material Ti-6 AL-4V Ti-6 AL-4V
Housing Material Ti-6 AL-4V Ti-6 AL-4V
Sensing Element Material PiezoElectric
Sensitivity, +/-5% [2] 5 mV/g 0.51 mV/m/s^2
Acceleration Range, ± 1000 Gpeak 9810 m/s^2 peak
Frequency Range, ±5% 3.3-3000 Hz 3.3-3000 Hz -100 -1.9
Frequency Range, ±10% 2.2-5000 Hz 2.2-5000 Hz 0 -0.8
Frequency Range, ±3dB 1.1-10000 Hz 1.1-10000 Hz 75 0
Resonance Frequency >20 kHz >20 kHz 100 0.6
Linearity [3] 1 %F.S. 1 %F.S. 200 1.5
Transverse Sensitivity, Max 6 % 6 % 225 2
Noise floor 0.007 Grms 0.069 m/s^2 rms 320 2.5
Spectral Noise 1Hz 1000 µGrms/sqr(Hz) 9810 µm/s^2 rms/sqr(Hz)
10Hz 500 µGrms/sqr(Hz) 4905 µm/s^2 rms/sqr(Hz)
100Hz 100 µGrms/sqr(Hz) 981 µm/s^2 rms/sqr(Hz)
1000Hz 60 µGrms/sqr(Hz) 589 µm/s^2 rms/sqr(Hz)
10000Hz 50 µGrms/sqr(Hz) 491 µm/s^2 rms/sqr(Hz)
Supply Current Range [4] 2 to 20 mA 2 to 20 mA
Compliance Voltage Range +18 to +30 VDC +18 to +30 VDC
Output Impedance, Typ. 100 Ω 100 Ω
Output Bias Voltage +7.5 to +9.5 VDC +7.5 to +9.5 VDC
0.15 to 0.25 sec 0.15 to 0.25 sec
ENVIRONMENTAL
Shock Max 5000 g pk 49050 m/s^2
Vibration Max 1500 g pk 14715 m/s^2
Operating Temperature -60 to +320 °F -51 to +160 °C
Seal Hermetic Hermetic
Magnetic Sensitivity at 100 Gauss 0.0001 g/Gauss 0.000981 m/s^2/Gauss
Base Strain Sensitivity 0.002 g/µε 0.01962 m/s^2/µε
配件
Recommended Accessories: model 4114B1 current source power unit, model 6273 petro mounting wax
Compatible Cables: 6811A, 6812A, 6824A, 6828A, 6873A, 6925A, 6933A, 6967A, 6997A
訂貨型號
3413A1
3413A2
相關型號
3263A1
3033B2
