環保在線>產品庫>閥門-主分類>蝶閥>其它蝶閥>>GRINNELL VALVES 格林奈爾蝶閥(現貨）

GRINNELL VALVES 格林奈爾蝶閥(現貨）

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱深圳市德隆泰科技有限公司
品牌
型號
所在地深圳市
廠商性質經銷商
更新時間2024/10/30 7:02:00
訪問次數72

產品標簽:

在線詢價收藏產品點擊查看電話

索取相關資料

公司介紹主營產品

FLOWLINE、中國臺灣AXE代理商；法國SOCOMEC、瑞士HUBA等*經銷商。公司多年來在產品研發、銷售和工程安裝調試等方面不懈努力，在流體測控及電氣自動化等領域取得了優異的成績。產品廣泛應用于各工業領域，主要業績包括上海煉油廠、江漢油田、湛江電廠、上海寶鋼等眾多*重點項目。
公司所代理產品已通過ISO9001/ISO14001質量、環境管理體系等行業相關嚴格認證，為用戶提供高品質、高可靠性的流體測控及電氣自動化產品。公司為中國世界工業原料及商品交易中心華南城會員供應商、華南地區流體測控自動化工程安裝服務提供商。公司擁有一批*從事流體測控及工業自動化技術研究、應用，實踐經驗豐富的優秀的工程技術人員，為客戶提供從設計方案、設備選型、施工安裝到售后質量跟蹤的高品質、高可靠性的一條龍服務。
德隆泰公司憑借雄厚的實力、充足的現貨庫存以及周到的服務與全國各地機電安裝公司，設備經銷商等建立了*穩定的合作關系。我們堅持“誠信、共贏”的宗旨，竭誠歡迎您來電來函洽談溝通合作。

展開顯示更多內容

儀器儀表機電設備電子產品壓力儀表電力智能儀表自動化系統集成

產品簡介在線詢價

GRINNELL VALVES 格林奈爾蝶閥，格林奈爾閥門，1000系列，8000系列，WC-8100，GHP系列GRINNELL VALVES 格林奈爾蝶閥(現貨）

GRINNELL VALVES 格林奈爾蝶閥(現貨）產品信息

GRINNELL VALVES 格林奈爾蝶閥 GRINNELL VALVES 格林奈爾蝶閥(現貨）
主要包括1000，8000，GHP三大系列

歡迎來到Grinnell閥門公司

Grinnell格林奈爾是工業、商業和建筑市場閥門的制造商。

Grinnell格林奈爾閥門采用*的加工設備生產。每個閥門在出廠前都經過110%的打壓測試，確保每一個閥門的安全可靠。
現貨供應GIRNNELL VALVES 美國格林奈爾光桿蝶閥，氣動蝶閥，現貨口徑有：DN80mm,DN100mm,DN150mm等規格。
型號為：
GRINNELL 080 WC-8100/6G/AN150
GRINNELL 100 WC-8100/6G/AN150
GRINNELL 150 WC-8100/6G/AN150

Series 1000 Resilient Seated Butterfly Valves

BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.

STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.

SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.

Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.

TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.

Series 1000 Drawings

PDF

Wafer Barestem
Wafer Lever Operated
Wafer Gear Operated

Lug Barestem
Lug Lever Operated
Lug Gear Operated

Series 8000 Resilient Seated Butterfly Valves

BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEMS
Heavy-duty, two-piece design allows for easy maintenance. Stems are secured by the use of retaining pins.

BEARINGS
Two bronze or Teflon^®* bearings are standard on 2"-12". Sizes above 12" have full-length bearings on upper and lower stems.

Stem/Disc Attachment
Rectangular drive ensures proper disc connection. No pins or bolts are exposed to flow.

Seat
Elastomer, reinforced with phenolic backing ring, enables valve to be used on pressure or vacuum service. Seat can be field replaced. Grinnell's special double seal design eliminates the need for flange gaskets. Three stem seal O-rings are molded into the the seat liner to back up the primary stem seal.

DISC
Streamlined for maximum flow and minimum seat wear. Ease of maintenance due to the elimination of bolts, pins, etc., as disc to stem connectors.

Dead-End Service
A unique patented lip, integral to the body prevents the liner from moving downstream, eliminating seat and flange leakage. This feature allows lug valve to be used in uni-directional, dead-end service applications at full rated pressure without the use of downstream flange.

* Teflon^® is a registered trademark of the E.I. DuPont de Neymour Company

Series 8000 Drawings

PDF

Dimensional Drawings with New Stem Dimensions
2" - 12" WAFER Bare Stem
2" - 12" LUG Bare Stem
14" - 24" WAFER Bare Stem
14" - 24" LUG Bare Stem

Dimensional Drawings with Old Stem Dimensions
2”-12” Wafer Barestem
14”-24” Wafer Barestem
2”-12” Wafer Lever Operated
2”-12” Wafer Gear Operated
14”-24” Wafer Gear Operated
2”-8” Wafer w/ 80 psi S/R Pneumatic Actuators
10”-12” Wafer w/ 80 psi S/R Pneumatic Actuators
2”-10” Wafer w/ Electric Actuators
12” Wafer w/ Electric Actuators
Wafer Sanitary Valves

2”-12” Lug Barestem
14”-24” Lug Barestem
2”-12” Lug Lever Operated
2”-12” Lug Gear Operated
14”-24” Lug Gear Operated
2”-8” Lug w/ 80 psi S/R Pneumatic Actuators
10”-12” Lug w/ 80 psi S/R Pneumatic Actuators
2”-10” Lug w/ Electric Actuators
12” Lug w/ Electric Actuators
Lug Sanitary Valves

Series GHP High Performance Butterfly Valves

		Body Material & Standard: Carbon Steel ASTM A216-WCB or 316 Stainless Steel ASTM A351-CF8M DISC Material & Standard: 316 Stainless Steel ASTM A 351-CF8M Stem & Taper Pins Material & Standard: 17-4PH ASTM A 564 Cond. H10751-CF8M Glａnd Bridge Material: 17-4SS PH Packing Material: PTFE or Graphite Bearings Material & Standard: 316 SS Nitride	Seat Retaining Ring Material & Standard: Carbon Steel ASTM A36 or Stainless Steel ASTM A240 Seat Material & Standard: RTFE Reinforced polytetrafluoroethylene [optional: PTFE]
		Two-Piece Stem Design Two-piece stem disc geometry maximizes flow capacity by increasing the available flow area through the valve. This increase in disc efficiency results in higher valve Cv.
		COMPETITOR one-piece stem	HI-SEAL two-piece stem
		Aspect Ratio = Open Area ÷ Disc Area

Series GHP High Performance Butterfly Valves

PDF

2”-12” Wafer Barestem
12”-12 Wafer Lever Operated
2”-12” Wafer Gear Operated

2”-12” Lug Barestem
2”-12” Lug Lever Operated
2”-12” Lug Gear Operated

關鍵詞：氣動蝶閥