FC-V機型特點： 1·復卷控制：全自動氣動比例閥控制芯軸夾持裝置提升，液壓伺服系統控制騎輥壓力，氣動頂針夾持芯軸； 2.分切下刀：每把底刀均由獨立的外轉子電機驅動； 3.前后復卷輥差速+騎輥控制成品密度及盤端整齊度；精確的對刀控制，誤差±0.1mm； 4·后架：可正反轉，方便操作；獨立驅動導輥，底部配導紙平臺，減少伸長率損失； 5·的壓光技術：鋼對鋼壓光，兩條壓光輥均由冷硬鑄鐵制成，且由兩個電機分別驅動；氣胎加壓；可調整的壓光間隙；可調整交叉角度補償中高； 6·配防護閘刀，進行運行保護，斷紙； 7.自動落芯軸功能； 8.液壓比例閥控制騎輥，氣動提升收卷芯軸； 9.可選自動插拔軸系統，方便操作，提高效率； 10.可選輔助散紙輥。 FC-V model features: 1. Rewinding control: The fully automatic pneumatic proportional valve controls the lifting of the spindle clamping device, the hydraulic servo system controls the roller pressure, and the pneumatic ejector pin clamps the spindle; 2. Cutting knife: Each bottom knife is driven by an independent outer rotor motor; 3. The differential speed of the front and rear rewinding rollers+the control of the density of the finished product and the neatness of the disc end by the riding roller; Accurate tool setting control with an error of ± 0.1mm; 4. Rear frame: capable of forward and reverse rotation, convenient for operation; Independently driven guide roller, equipped with a paper guide platform at the bottom to reduce elongation loss; 5. Leading calendering technology: steel to steel calendering, with two calendering rollers made of chilled cast iron and driven by two separate motors; Pneumatic tire compression; Adjustable pressure gap; Adjustable cross angle compensation medium high; 6. Equipped with protective knife for operation protection and paper breakage; 7. Automatic core dropping function; 8. The hydraulic proportional valve controls the riding roller and pneumatically lifts the winding core shaft; 9. Optional automatic shaft insertion and extraction system for easy operation and improved efficiency; 10. Optional auxiliary loose paper roller.