型號 Type | HV-5Z/LCD HVS-5Z/LCD | HV-10Z/LCD HVS-10Z/LCD | HV-30Z/LCD HVS-30Z/LCD | HV-50Z/LCD HVS-50Z/LCD |
物鏡/壓頭切換Lens/Indenter switch | 自動轉塔 With Motorized Turret |
試驗力 Test force | N | 2.942,4.903 9.807,19.61 29.42,49.03 | 4.903,9.807 19.61,29.42 49.03,98.07 | 9.807,24.52 49.03,98.07 196.1,294.2 | 9.807,49.03 98.07,196.1 294.2,490.3 |
符號 Symbol | HV0.3,HV0.5 HV1,HV2 HV3,HV5 | HV0.5,HV1 HV2,HV3 HV5,HV10 | HV1,HV2.5 HV5,HV10 HV20,HV30 | HV1,HV5 HV10,HV20 HV30,HV50 |
加荷方式 Loading mode | 自動加載,保持和卸載 Automatic application, duration and removal of load |
保荷時間 Duration time | 5 – 60 sec selectable 步長 (In step of ) 5 sec. |
硬度測量范圍 Measuring range | 5 HV – 3000 HV |
測量顯微鏡 Microscope | 物鏡Objective | 20x 10x | 10x 5x |
目鏡Eyepiece | 15x |
最小檢測單位 Min. detection | 0.05μm | 0.1μm |
總放大倍率 Total Magnification | 300x 150x | 150x 75x |
光路切換 Optical path | 測量/CCD攝影切換 Measurement / Photo switch |
測量讀數方式 Measuring mode | | HV-:輸入用測微目鏡測得的對角線長度, 即在LCD上顯示硬度值。可打印記錄。 After taking the D1(D2) from eyepiece micrometer and entering them, the hardness value is displayed on LCD and the data can be printed out. HVS-:數顯digital display | | |
數據輸出 Data output
| | 各硬度值,平均值,不均勻度,標準偏差,打印輸出,HVS可顯示洛氏HRC HRA轉換值等 Print-out hardness values, average, nonuniformity, standard deviation | | |
試件高度 Max..test height | 160mm |
壓頭到機壁距離 Center-wall distance | 135 mm |
精度Accuracy | 執行標準:中華人民共和國國家標準 GB/T 4340.2-1999金屬維氏硬度計試驗 第二部分:硬度計的檢驗 上海市企業標準 Q/NWFQ 02-2002維氏硬度計 |
標準配件,附件 Standard attachments
| 物鏡20x,10x (在機上) | 物鏡10x, 5x(在機上) |
X-Y工作臺 維氏壓頭 (在機上) 標準硬度塊一套HV5 HV10 (HV/HVS-5Z只配一塊標準硬度塊HV5 ) 薄片夾緊器 平口鉗 小圓工作臺 小水平儀器 內置打印機 |
選購件 Options | 大圓平面工作臺,萬向式平口鉗,120°V型工作臺 90°V型工作臺,數碼相機及適配鏡 |
電源 Power supply | 220 VAC, 50/60 Hz |
尺寸 Dimensions | 凈 Net:22×54×65 cm 包裝 Packing: 32×62×75 cm |
重量 Weight | 主機 Main tester:38 Kg 毛重 Gross:60 Kg |