臥式刮刀卸料離心機是連續運轉、間歇操作的過濾式離心機，其控制方式為自動控制，也可手動控制。
離心機操作過程中的進料、分離、洗滌、脫水、卸料及濾布再生等過程均可在全速狀態下完成，單次循環時間短，處理量大，并可獲得較干的濾渣和良好的洗滌效果。臥式刮刀卸料離心機廣泛應用于化工、制藥、食品等行業。
虹吸式臥式刮刀卸料離心機是在普通臥式刮刀卸料離心機的基礎上，增加了虹吸功能，利用虹吸原理增加過濾推動力，透過過濾介質的濾液全部進入濾液室，濾液通過虹吸管排出轉鼓，調節虹吸管吸入口位置可改變虹吸室內液面深度，以改變過濾推動力，調節過濾速度、處理能力濾餅的含濕量以及洗滌效率。
設置反沖裝置，可在需要時向虹吸室內加入反沖液，洗滌液經過濾介質流向轉鼓內，使過濾介質恢復過濾性能，得以再生。虹吸式臥式刮刀卸料離心機適合于生產量大、要求濾餅含濕量低并充分洗滌的場合。
Peeler centrifuge is continuously rotating and intermittently operation centrifuge. t can be either automatic control or manual controlThe whole process of operation including materials feeding separating, cleaning, dewatering discharging and flter cloth recycling can be achieved atfull speed . Single cycle of processing materials is shortly but with large quantity The solids cake can be well dried and cleaned.Horizontal scraper discharge centrifuge is widely used in chemical, pharmaceutical, food and other industries
The siphon horizontal scraper discharging centrifuge is based on the ordinary horizontal scraper discharging centrifuge. t adds the siphon function.The siphon principle is used to increase the flter impetus Al fltrate through the flter medium enters the filter chamber. The filtrate discharges thedrum through the siphon tube. The siphon chamber liquid can be changed by adjusting the position of the siphon suction port. The surface depth isused to change the impetus of fltration, adjust the filtration speed, processing capacity, moisture content of flter cake and washing efhiciency.
The backwashing device can add backwashing liquid to the siphon chamber when needed,ａnd the washing iquid flows to the drum through thefilter medium, so that the filter medium can recover its filtering performance and regenerate.The siphon horizontal scraper discharge centrifuge is suitable for the occasion of large production, low moisture content of flter cake and fullwashing.
主要性能和用途
Main performance and purpose
GKF潔凈型臥式刮刀卸料離心機是連續運轉、批處理操作的過濾式離心機，結構和系統設計符合制藥行業中的GMP要求，批處理循環時間短，處理量大，并可獲得較好的過濾(濾餅含水率低)和洗滌效果。離心機主要性能和用途為:
隔墻式安裝形式設計，工作區域與機座、傳動、液壓、潤滑等結構裝置隔離;獨立式液壓系統和潤滑系統;配置全自動在線監測的氮氣保護系統:在線清洗系統:氣體反吹式殘余濾餅去除裝置:在線滅菌系統:PLC可編程控制、變頻調速、電阻式能耗制動等。
離心機操作過程中的進料、分離、洗滌、脫水、卸料及濾布再生、在線清洗在線滅菌、氮氣保護等過程按預先設定的程序運行。控制方式為全自動控制也可脫機手動操作。
GKF潔凈型臥式刮刀卸料離心機適用于粘度小、衛生要求高、有毒有害、易燃易蝕介質的固液分離。主要用于制藥、食品等工業領域的生產。
GKF pharma Peeler Centrifuge is filter type centrifuge with continuous running andbatch operation, GMP requirements have been full taken into consideration instructure and system design, batch time is short, its processing capacity is large, itmay achieve rather dry sludge(Filter cake contains low moisture) and good washingeffect.
Clean room installation fully separates the working area from machine stａnd , drive,hydraulic, lubrication device, it is allocated with nitrogen protection system, CIPsystem, Online sterilization system, PLC program control, inverter start-up, highspeed resistance dynamic braking.
Feeding, filtration, washing, dewatering, discharging and regeneration of filter clothCIP Online sterilization, nitrogen protection are operated by pre-set programs. Thecontrol system incudes automatic control and manual control.GKF pharma peeler centrifuge is suitable for solid-liquid separation for hazardous,toxic and flammable medium with small viscosity and high sanitation requirements.t is mainly used in solid-liquid separation of medicals and food industries.
主要特點
Main features
-全密閉、潔凈型結構設計，符合GMP規范要求，滿足藥品、食品的衛生要求。
-隔墻式結構設計，電機傳動、液壓潤滑等動力系統與轉鼓、機殼、進出料裝置等，生產區通過機座面板與墻體的柔性連接，隔斷。
-采用PLC控制，按預定程序自動運行。觸摸屏操作、可實現人機對話，操作維護方便。
-執行元件采用電-氣-液自動控制，進料、分離、洗滌、脫水甩干、卸料、殘余濾餅去除、在線清洗、在線滅菌等全過程監控。
-機殼為整體大翻蓋形式，便于對轉鼓及工作區域全部部件進行清洗:快開式液壓鎖緊結構，操作方便可靠。
-采用變頻控制，轉鼓速度無級可調。可按要求設定進料.分離、洗滌、脫水、卸料、殘余濾餅吹掃等工藝速度。液態阻尼式隔振裝置，無需浮動平臺，機器運轉平穩。
-雙重主軸密封結構設計，確保潔凈區不被潤滑油及其它污染物污染。所有密封件均采用氟橡膠和硅橡膠等。
-完善的多重安全保護系統，轉速監控，過振動保護，開蓋保護，電機過熱過載保護，門蓋鎖緊電-液聯鎖保護、刮刀限位保護、主軸承溫升保護、潤滑斷油保護等裝置保證離心機的安全運行。
-離心機潔凈區采用優質不銹鋼制造，與物料接觸部分表面高等級鏡面拋光，符合耐腐蝕和衛生要求。
-氣體反吹裝置，可在刮料時輔助刮刀卸料，有效去除殘余濾餅層。
-在線清洗系統，在離心機中內外表面，轉鼓底、卸料斗、門蓋等部位設置多個噴淋球，可在線對工作區內部進行沖洗，達到工藝上的潔凈度要求。
-全自動在線監測的氮氣保護系統，確保離心機始終在惰性氣體的正壓下工作，必要時可配置在線氧量分析儀，以實現防爆要求的目的可配置在線滅菌裝置( VHP)，對離心機內腔及管路進行在線滅菌。
Fully-enclosed and clean structural design complies with cGMP requirements andmeets requirements for aseptic production of medicine and food.Clean room installation design realize flexible connections and completeseparates the dynamic systems such asthe motor drive and hydraulic lubrication from production area such as thebasket,case and feeding/discharging devices and the wall.PLC control for automatic operation is in accordance with the pre-setprogram.Touch screen operation, realizing human-machine dialogue, which iseasy foroperation and maintenance.Action elements like feeding, filtration,washing, dry spinning,discharging ,residual cake removal, CIP and online sterilization is with automaticelectro-pneumatic-hydraulic control.Big hinged cover design makes it easy to clean all parts in the basket and theoperation zone. Ouick-opening hydraulic locking device ensures easy and reliableoperation.
The drum speed can be adjusted steplessly by frequency conversion control. Theprocess speed of feeding, separating, washing, dewatering, discharging andresidual filter cake cleaning can be set as required.Liquid-damping vibration isolators without floating platform ensure stableoperation of the centrifuge.Dual shaft seal structure design protects the clean room from contamination oflubrication oil and other pollutants. All seals are made of the fluorous rubber andsilicon rubberMultiple safety protection system: includes rotation speed monitoring,over-vibration protection, cover opening protection, motor overload andoverheat protection, electric-hydraulic interlocking protection for cover lockingdevice,scraper limit protection, main shaft temperature rise protection,lubrication oil failure protection and other devices.
With high-quality stainless steel material of construction for the centrifuge andhigh-grade mirror finishing surface treatment. which meets the requirements foranti-corrosion and sanitation.
Gas counter-blow device helps removing the residual solid cake while scraping.ClP system and spray cleaning bOlls mounted on the internal/external surfaces,basket bottom, discharge hopper and cover effectively remove the remainingsolid from the basket and the interior of the housing.Fully-automatic online monitoring nitrogen protection system ensuring thecentrifuge operates at positive pressure of inert gas. and if necessary, onlineoxygen volume analyzer may be provided so as to meet the requirements ofexplosion-proof.Online sterilizing device can be configured (VHP), carry out the online sterilizationfor centrifuge inner cavity and pipeline.
主要結構
Main structure
技術參數
Technical parameters
