YPF系列膜片壓力表
YPF Series Theca Pressure Meter Series
YPF Series Theca Pressure Meter Series
YPF系列膜片壓力表簡介
膜片壓力表適用于測量具有一定腐蝕性、非凝固或非結晶的各種流體介體的壓力或真空，它是解決測量高溫粘稠壓力的有效途徑。
耐腐蝕性能取決于膜片材料。可根據測量介質對耐腐蝕性能的不同要求而選用不同材質的膜片。
不銹鋼膜片壓力表的導壓系統和外殼等均為不銹鋼，有較強的耐腐蝕性能。
耐震膜片壓力表內部充灌阻尼液和配套緩沖裝置，具有良好的耐震性能。在被測介質的壓力有強烈脈沖變化或壓力沖擊和在生產工藝中經常突然卸荷的場合，以及環境震動較大的場所中，耐震膜片壓力表都能穩定進行測量。
Brief introduction
Diaphragm pressure meters are suitable for measuring pressure or negative pressure of various liquid mediums that is corrosive, non-crystalloid and non-concretionary.Itis officient path to slove measure high temperature viscidity pressure.
Corrosion resistance depends on diaphragm material. Choosing diaphragm material is decided by different performance of corrosion resistant that the measured medium required.
In stainless steel diaphragm pressure meters, stainless steel material is adopted in manufacturing pressure leading system and its crust, so this sort of meters possesses better corrosion-resistant performance.
Shockproof diaphragm pressure meter is filled with damping liquid inside and assembled with buffering device, owning good performance of shock proof. This sort of meters can measure pressure steadily in locations where the pressure of medium changes intensely and pressure shock exists, or pressure is released suddenly in the course of manufacturing, or working environment shock largely.
構成示意圖 Internal structure
結構原理
儀表由測量系統(包括法蘭接頭、波紋膜片)、傳動指示機構(包括連桿、齒輪傳動機構、指針和度盤)和外殼(包括表殼和罩圈)等組成。儀表外殼為防濺結構，具有較好的密性，故能保護其內部機構免受污穢浸入。
儀表的作用原理是基于彈性元件(測量系統上的膜片)變形。在被測介質的壓力作用下，迫使膜片產生相應的彈性變形——位移，借助頂桿使經傳動機構工作，由固定于齒輪上的指針將被測值在度盤上指示出來。
Configuration principle
This sort of meters is composed of measuring system (including flange joint, ripple diaphragm), driving indicating machine (including connecting bar, gear wheel driving machine, pointer and meter dial), and crust (including meter shell and cover circle). Meter crust is designed into antispatter structure, with better sealing performance, so it can prevent dirtiness from immerging into the inner structure.
Operation principle of the meters is based on distortion of elastic components (diaphragm used in measuring system). Under the action of pressure of measured medium, diaphragm will produce corresponding elastic distortion－displacement. The displacement is enlarged by driving machine in virtue of connecting bar, thus measured pressure value will be shown up gradually by pointer fixed on gear wheel.
主要技術參數
- 精確度：2.5級
- 使用環境溫度：-40~+70℃ 表殼內不充油 5℃~55℃ 表殼內充甘油
-25℃~55℃ 表殼內充硅油 相對濕度不大于90% - 溫度影響：使用溫度偏離20±5℃時，其溫度附加誤差不大于 0.04%/℃
- 工作位置：垂直安裝
- 外殼防護等級：IP64
Principal technical parameters
- Accuracy: 2.5 grades
- emperature of applicable circumstance: -40~+70℃,
- with no petrol filled inside the crust 5℃~55℃
- with glycerin filled inside the crust
- Temperature affect: (with temperature departure of 20±5℃
- the additional error shall be less than 0.04%/℃
- Working condition: :uprighness connection
- Defend grade of crust: IP64
型號表示 Model designations
標記示例： YPFN-150B-MF 產品電腦編碼：0420060430
不銹鋼耐震膜片壓力表(法蘭連接)。產品電腦編碼詳見《膜片壓力系列儀表選型指南》。
Mark example: YPFN-150B-MF Electronic code:0420060430
Stainless steel shock proof diaphragm pressure meter(flange connection).Production computer coding please see："Guide
for type selection of theca series instruments and meters
外形尺寸 External dimension
型號規格 Types and specifications
材質說明 Material description
膜片壓力系列儀表選型指南 Diaphragm pressure meter series selection guidelines
訂貨須知 Ordering instructions
訂貨時須注明：產品電腦編碼、型號、名稱、精確度、測量范圍。如特殊要求，請注明技術要求。
Ordering instructions: The product computer code ,types, names, accuracy grades, and measuring ranges .must be clearly noted. In case of special requirements, technical requirements shall be clearly noted specifications on the back of the order on ordering goods.
