膜盒壓力表采用膜盒作為測壓力敏感元件。測量對銅合金不起腐蝕作用、無爆炸危險的氣體的微壓和真空，廣泛應用于鍋爐通風、氣體管道、燃燒裝置及其它類似設備上。

      不銹鋼膜盒壓力表在普通膜盒壓力表的基礎上導壓系統及外殼均采用了不銹鋼材料。應用于耐腐蝕要求較高的工藝流程中對各種氣體介質的壓力和真空的測量。

      在膜盒壓力表的基礎上內部填充阻尼液和緩沖裝置即成耐震膜盒壓力表具有良好的耐震性能；適用于被測介質的壓力有強烈脈沖變化或壓力沖擊和在生產工藝中經常突然卸荷的場合，以及環境震動較大的場所。

      膜盒壓力表與相應的電氣器件配套使用，即成為電接點膜盒壓力表，可達到對被測壓力系統實現預先設定的zui大或zui小壓力值的雙位自動控制和發信（報警）的目的。          

      我公司生產的YE-70膜盒壓力表批量出口美國。
 

      Theca box pressure gauges are used to measure micro pressure and negative pressure of gas that has no danger of explosion and does not erode alloy.       Adopting theca box as sense organ, the gauges are  widely applied to boiler ventilating, gas pipeline, burning device and other similar devices.

      Based on common theca box pressure gauges, stainless theca box pressure gauges introduce stainless material uesd in pressure leading system and crust. The gauges are not only suitable for measuring micro pressure and negative pressure of various gas medium in craftwork flow, which require higher performance of corrosion resistance, but also can be applied to boiler ventilating, gas pipeline, burning device and other similar devices.
 

 

      儀表由導壓系統（包括接頭、膜盒等）、傳動機構、指示裝置、和外殼等組成（電接點膜盒壓力表還包括磁助電接點裝置、調節裝置及航空插頭等）。

      當被測介質作用于膜盒時，其管端產生相應的彈性變形——位移，經傳動機構放大后，由指示裝置在度盤上把被測壓力指示出來。

      電接點膜盒壓力表在指示裝置將被測壓力顯示在儀表度盤上的同時，指針帶動電接點裝置的活動觸點與設定指針上的觸頭（上限或下限）相接觸的瞬時，控制系統接通或斷開電路，以達到自動控制和發信報警的目的。

      The meter is composed of pressure leading system （including joint and theca box, etc）, driving framework, indicating device and crust.（electric contact theca box dressart meter in dude,magnetism of electric conacd）

      When theca box is operated by measured medium, its end will produce elasticity distortiondisplacement. The displacement is enlarged by driving machine, and measured pressure value will be shown up by indicating device on meter dial.

When indicating device installed at electric contact theca box pressure meter shows the measured pressure value on meter dial, the pointer will simultaneously drive active contactor of electric contact device to meet the contactor （upper limit or lower limit） installed at the pointer. Thus control system will switch on or cut off circuit, and both aims of autocontrol and signal sending are all achieved

 

 

標記示例：YEX-100-ZT 產品電腦編碼為0030053402

      膜盒電接點壓力表，表殼公稱直徑100mm，安裝形式為軸向前邊，軸向盤裝式。詳細電腦編碼參照《膜盒壓力系列儀表選型指南》

      Marking in stance：YEX-100-ZT  Production computer coding：0030053402

Electric contact theca box pressure meter , meter dials nominal diameter is 100mm, installation mode is axial front, and installing mode is axial plate mounting. For detail production computer coding information, please refer to “Guide for type selection of theca box series instruments and meters”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

訂貨時須注明：產品電腦編碼、型號、名稱、精確度等級、測量范圍。如特殊要求，訂貨時請注明技術要求。

      膜盒壓力表采用膜盒作為測壓力敏感元件。測量對銅合金不起腐蝕作用、無爆炸危險的氣體的微壓和真空，廣泛應用于鍋爐通風、氣體管道、燃燒裝置及其它類似設備上。

      不銹鋼膜盒壓力表在普通膜盒壓力表的基礎上導壓系統及外殼均采用了不銹鋼材料。應用于耐腐蝕要求較高的工藝流程中對各種氣體介質的壓力和真空的測量。

      在膜盒壓力表的基礎上內部填充阻尼液和緩沖裝置即成耐震膜盒壓力表具有良好的耐震性能；適用于被測介質的壓力有強烈脈沖變化或壓力沖擊和在生產工藝中經常突然卸荷的場合，以及環境震動較大的場所。

      膜盒壓力表與相應的電氣器件配套使用，即成為電接點膜盒壓力表，可達到對被測壓力系統實現預先設定的zui大或zui小壓力值的雙位自動控制和發信（報警）的目的。          

      我公司生產的YE-70膜盒壓力表批量出口美國。
 

      Theca box pressure gauges are used to measure micro pressure and negative pressure of gas that has no danger of explosion and does not erode alloy.       Adopting theca box as sense organ, the gauges are  widely applied to boiler ventilating, gas pipeline, burning device and other similar devices.

      Based on common theca box pressure gauges, stainless theca box pressure gauges introduce stainless material uesd in pressure leading system and crust. The gauges are not only suitable for measuring micro pressure and negative pressure of various gas medium in craftwork flow, which require higher performance of corrosion resistance, but also can be applied to boiler ventilating, gas pipeline, burning device and other similar devices.
 

 

      儀表由導壓系統（包括接頭、膜盒等）、傳動機構、指示裝置、和外殼等組成（電接點膜盒壓力表還包括磁助電接點裝置、調節裝置及航空插頭等）。

      當被測介質作用于膜盒時，其管端產生相應的彈性變形——位移，經傳動機構放大后，由指示裝置在度盤上把被測壓力指示出來。

      電接點膜盒壓力表在指示裝置將被測壓力顯示在儀表度盤上的同時，指針帶動電接點裝置的活動觸點與設定指針上的觸頭（上限或下限）相接觸的瞬時，控制系統接通或斷開電路，以達到自動控制和發信報警的目的。

      The meter is composed of pressure leading system （including joint and theca box, etc）, driving framework, indicating device and crust.（electric contact theca box dressart meter in dude,magnetism of electric conacd）

      When theca box is operated by measured medium, its end will produce elasticity distortiondisplacement. The displacement is enlarged by driving machine, and measured pressure value will be shown up by indicating device on meter dial.

When indicating device installed at electric contact theca box pressure meter shows the measured pressure value on meter dial, the pointer will simultaneously drive active contactor of electric contact device to meet the contactor （upper limit or lower limit） installed at the pointer. Thus control system will switch on or cut off circuit, and both aims of autocontrol and signal sending are all achieved

 

 

標記示例：YEX-100-ZT 產品電腦編碼為0030053402

      膜盒電接點壓力表，表殼公稱直徑100mm，安裝形式為軸向前邊，軸向盤裝式。詳細電腦編碼參照《膜盒壓力系列儀表選型指南》

      Marking in stance：YEX-100-ZT  Production computer coding：0030053402

Electric contact theca box pressure meter , meter dials nominal diameter is 100mm, installation mode is axial front, and installing mode is axial plate mounting. For detail production computer coding information, please refer to “Guide for type selection of theca box series instruments and meters”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

訂貨時須注明：產品電腦編碼、型號、名稱、精確度等級、測量范圍。如特殊要求，訂貨時請注明技術要求。